---
title: Machinery Transport in Dayton, Nevada | ILS
url: https://machinerymovingnv.com/areas/dayton/machinery-transport/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Service area](https://machinerymovingnv.com/areas/)
- [Dayton](https://machinerymovingnv.com/areas/dayton/)
- Machinery transport

# Machinery transport in Dayton, Nevada

ILS hauls machinery to and from Dayton on its own trucks and trailers, 14.7 road miles along US-50 from the Carson City yard. Estimates are free.

- **From the Goni Road yard:** 14.7 miles road distance, OpenStreetMap routing

- **Elevation:** 4,302 ft USGS 3DEP

- **County:** Lyon County US Census Bureau

- **Population:** 15,781 ACS 5-year 2024

- **Manufacturing establishments:** 9 ZIP 89403, County Business Patterns 2023

Key points

- 14.7 road miles on US-50 through Mound House
- About 34 minutes by car in free flow, not a truck time
- Trailers to 50 tons: single-drop, double-drop, gooseneck and beaver
- Legal limits: 14 ft high, 70 ft combination length, 102 in wide without a permit (NRS 484D)
- Local transport on ILS trucks

ILS is a for-hire motor carrier of property (USDOT 642556, MC-531191). Dayton's ZIP 89403 had 177 establishments in the 2023 County Business Patterns, including 36 in construction and 9 in manufacturing, so the loads leaving or arriving there may be as likely to be shop equipment as plant machinery.

## One highway, a short run

The general method is on our [machinery transport](https://machinerymovingnv.com/services/machinery-transport/) page. The trip from Goni Road to Dayton is US-50 east, which makes route choice simple and permit routes short to describe. If a machine is over legal size, the NDOT permit names US-50 and the stretch needed. Pilot car triggers are in NAC 484D.670, and our [pilot car guide](https://machinerymovingnv.com/guides/pilot-car-rules-nevada/) summarizes them.

## Legal size at a glance

A load that fits inside the limits needs no permit. A load over any one of them does, so measure the machine as it rides on the trailer, not as it stands on the floor.

Legal size at a glance Dimension Limit without a permit Source

Height 14 ft NRS 484D.605

Combination length 70 ft NRS 484D.615

Width 102 in NRS 484D.685

## Loading at each end

Where a Dayton site is a small shop or yard, the trailer may have to be backed in or loaded from the street. That is where the forklift with a rigging boom earns its keep, since it can lift a machine from ground level onto a trailer deck. Our [loading and unloading page](https://machinerymovingnv.com/services/loading-unloading/) describes the method. Send a photo of where the trailer will stand.

## Securing the machine

Federal cargo-securement rules apply to every load on a public road, and a short run does not lighten them. A machine moves on the trailer the same way on US-50 as on an interstate, so the chains, binders and blocking are chosen for the machine and not for the distance.

## Beyond Dayton

A machine can also pass through Dayton on a longer trip. Long-distance legs go through a network of trucking companies, and local legs on ILS trucks.

### Sources (3)

- Nevada Legislature : [leg.state.nv.us/nrs/nrs-484d.html](https://www.leg.state.nv.us/nrs/nrs-484d.html) (checked November 2026)
- FMCSA SAFER : [safer.fmcsa.dot.gov/](https://safer.fmcsa.dot.gov/) (checked November 2026)
- U.S. Census Bureau : [census.gov/programs-surveys/cbp.html](https://www.census.gov/programs-surveys/cbp.html) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Related

- [Machinery transport](https://machinerymovingnv.com/services/machinery-transport/)
- [Dayton, NV](https://machinerymovingnv.com/areas/dayton/)
- [Machinery moving in Dayton](https://machinerymovingnv.com/areas/dayton/machinery-moving/)
- [Industrial rigging in Dayton](https://machinerymovingnv.com/areas/dayton/rigging/)
- [Millwright services in Dayton](https://machinerymovingnv.com/areas/dayton/millwright-services/)
- [Machinery transport](https://machinerymovingnv.com/services/machinery-transport/)
- [Dayton, NV](https://machinerymovingnv.com/areas/dayton/)
- [Equipment trailers to 50 tons](https://machinerymovingnv.com/equipment/trailers/)
- [Nevada oversize load checker](https://machinerymovingnv.com/tools/oversize-load-checker/)
- [Machinery moving in Dayton](https://machinerymovingnv.com/areas/dayton/machinery-moving/)
- [Mound House, NV](https://machinerymovingnv.com/areas/mound-house/)

## Machinery transport in Dayton: questions

[All questions](https://machinerymovingnv.com/faq/)

### Does ILS haul to Dayton on its own trucks?

Yes. Local transportation is on ILS trucks, with trailers rated to 50 tons.

### Do I need a permit to move a machine to Dayton?

You need one if the load is over the legal height, width, length or weight. The oversize load checker shows where the limits sit.

### How long is the drive?

14.7 road miles. About 34 minutes by car in free flow is a free-flow driving-time estimate, not a schedule.
