---
title: Industrial Rigging in Dayton, Nevada | ILS
url: https://machinerymovingnv.com/areas/dayton/rigging/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Service area](https://machinerymovingnv.com/areas/)
- [Dayton](https://machinerymovingnv.com/areas/dayton/)
- Industrial rigging

# Industrial rigging in Dayton, Nevada

ILS rigs machinery in Dayton under Nevada license 0083125 (C-14I Rigging and Cranes), with forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms and a 300-ton hydraulic gantry system. Dayton is 14.7 road miles from the Carson City yard by US-50, and estimates are free.

- **From the Goni Road yard:** 14.7 miles road distance, OpenStreetMap routing

- **Elevation:** 4,302 ft USGS 3DEP

- **County:** Lyon County US Census Bureau

- **Population:** 15,781 ACS 5-year 2024

- **Manufacturing establishments:** 9 ZIP 89403, County Business Patterns 2023

Key points

- Forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms
- 300-ton hydraulic gantry system; 2-ton portable aluminum gantry
- 14.7 road miles from the yard, about 34 minutes by car in free flow
- ZIP 89403: 36 construction, 9 manufacturing establishments (CBP 2023)
- Nevada license 0083125, C-14I Rigging and Cranes

Dayton's ZIP 89403 listed 36 construction establishments and 9 manufacturers among 177 in the 2023 County Business Patterns. For a rigger, that points to lifts in yards as well as inside shops, which changes the footing and the way a load is set.

## Yard lifts and shop lifts

The general method is on our [rigging](https://machinerymovingnv.com/services/rigging/) page. A lift inside a shop is constrained by the ceiling, the door and the slab. A lift in a yard is constrained by the ground. Gravel, packed fill and asphalt all carry a forklift or a gantry foot differently, so we look at the ground under a lift just as closely as the load.

- Inside: ceiling height, door width, slab thickness, trenches
- Outside: ground bearing, slope, overhead lines, where the trailer can stand
- Both: the weight, the center of gravity and the lift points on the machine

## Matching method to load

Light loads in tight bays are the job for the 2-ton portable aluminum gantry. A mid-size machine on open ground suits a forklift with a rigging boom. A very heavy load, which can go up to 300 tons for ILS, calls for the hydraulic gantry on cribbing. For a heavy machine on a slab the plan must account for the floor's capacity, as our [floor loads guide](https://machinerymovingnv.com/guides/floor-loads-and-foundations/) explains.

## Inspection and standards

Rigging gear is inspected before use and damaged slings come out of service (29 CFR 1910.184). Forklifts are operated under 29 CFR 1910.178, and the ASME B30 standards cover slings, hardware and gantries. We bring protective gear and safety training to every lift.

## Near the yard, near the crew

At 14.7 road miles, a Dayton lift is a short trip from the crew's base, and the crew that rigs the machine can haul it on an ILS trailer and set it at the other end. A lift also goes better when the plan is shared with the shop beforehand: who locks out the machine, who clears the area and where the trailer will stand.

### Sources (4)

- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.184](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.184) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.178](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.178) (checked November 2026)
- U.S. Census Bureau : [census.gov/programs-surveys/cbp.html](https://www.census.gov/programs-surveys/cbp.html) (checked November 2026)
- ASME : [asme.org/codes-standards/find-codes-standards/b30-9-slings](https://www.asme.org/codes-standards/find-codes-standards/b30-9-slings) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Related

- [Industrial rigging](https://machinerymovingnv.com/services/rigging/)
- [Dayton, NV](https://machinerymovingnv.com/areas/dayton/)
- [Machinery moving in Dayton](https://machinerymovingnv.com/areas/dayton/machinery-moving/)
- [Millwright services in Dayton](https://machinerymovingnv.com/areas/dayton/millwright-services/)
- [Machinery transport in Dayton](https://machinerymovingnv.com/areas/dayton/machinery-transport/)
- [Industrial rigging](https://machinerymovingnv.com/services/rigging/)
- [Dayton, NV](https://machinerymovingnv.com/areas/dayton/)
- [Machinery moving in Dayton](https://machinerymovingnv.com/areas/dayton/machinery-moving/)
- [2-ton portable aluminum gantry](https://machinerymovingnv.com/equipment/portable-gantry/)
- [Forklifts with rigging booms (3,000 to 100,000 lbs.)](https://machinerymovingnv.com/equipment/rigging-forklifts/)
- [Rigging gear and how it is inspected](https://machinerymovingnv.com/guides/rigging-gear-and-inspection/)

## Industrial rigging in Dayton: questions

[All questions](https://machinerymovingnv.com/faq/)

### How heavy a machine can ILS rig in Dayton?

ILS has the capacity of moving and relocating equipment weighing up to 300 tons. The method for a given machine comes from its weight and the ground or floor.

### Do you rig outdoors as well as inside?

Yes. Yard lifts are planned around ground bearing, slope and overhead lines.

### How far is Dayton?

14.7 road miles from 3868 Goni Rd via US-50. Car time of 34 minutes in free flow is an estimate.
