---
title: Machinery Transport to Fallon, NV | ILS
url: https://machinerymovingnv.com/areas/fallon/machinery-transport/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Service area](https://machinerymovingnv.com/areas/)
- [Fallon](https://machinerymovingnv.com/areas/fallon/)
- Machinery transport

# Hauling machinery to Fallon, Nevada

ILS hauls machines to and from Fallon on its own trucks and equipment trailers rated to 50 tons, 61.3 road miles on US-50 through Dayton and Silver Springs. Estimates are free.

- **From the Goni Road yard:** 61.3 miles road distance, OpenStreetMap routing

- **Elevation:** 3,965 ft USGS 3DEP

- **County:** Churchill County US Census Bureau

- **Population:** 9,463 ACS 5-year 2024

- **Manufacturing establishments:** 17 ZIP 89406, County Business Patterns 2023

Key points

- 61.3 road miles on US-50; about 82 minutes by car in free flow
- Trailers to 50 tons; removable gooseneck and beaver trailers
- Federal authority USDOT 642556, MC-531191
- Permits per NRS and NAC 484D when dimensions exceed legal
- Local hauls on ILS trucks

US-50 is the main road between Carson City and Fallon, so a haul there is a long, simple route where the load decides everything. A machine within legal dimensions rides on a standard trailer. An oversize machine needs an NDOT permit, a named route and sometimes pilot cars.

## Planning a 61-mile haul

The general method is on our [machinery transport](https://machinerymovingnv.com/services/machinery-transport/) page. A haul of this length needs a plan for the whole trip. The truck needs enough hours of daylight, a place at the destination to set down, and a route known in advance. For an oversize load, the permit sets the route and travel conditions. The [pilot car guide](https://machinerymovingnv.com/guides/pilot-car-rules-nevada/) explains when escorts apply under NAC 484D.670.

## Legal dimensions at a glance

Legal dimensions at a glance Dimension Nevada base limit Reference

Height 14 feet NRS 484D.605

Width 102 inches NRS 484D.685

Combination length 70 feet NRS 484D.615

Beyond these NDOT single-trip or annual permit NAC 484D.655, .660

## Securing the machine

Federal cargo securement rules (49 CFR part 393) require tiedowns sized to the load. A machine with a high center of gravity needs extra attention, and a long highway haul adds hours of vibration. Tables and heads are locked, loose parts removed and fluids checked before the machine leaves.

## What the Fallon numbers add

County Business Patterns lists 464 establishments in ZIP 89406: 57 in construction, 23 in wholesale, 17 in manufacturing. Fallon sits about 687 feet below Carson City; the elevation difference does not change the permit rules.

## Getting an estimate

Estimates are free. For the full job, see [machinery moving in Fallon](https://machinerymovingnv.com/areas/fallon/machinery-moving/).

- Pickup and delivery addresses
- Machine type, weight and dimensions as loaded
- Lifting or driving on and off
- Loading and unloading conditions at each end

## Loading and unloading at each end

Loading is half of every haul. A machine on a dock-height floor can be rolled on, and one on a ground-level slab is lifted or skidded on, which is why we ask about both ends. Our [loading and unloading](https://machinerymovingnv.com/services/loading-unloading/) page covers the methods. Tell us about overhead lines, soft ground or tight yards at the Fallon site so the crew arrives with the right equipment.

### Sources (3)

- Nevada Legislature : [leg.state.nv.us/nrs/nrs-484d.html](https://www.leg.state.nv.us/nrs/nrs-484d.html) (checked November 2026)
- Electronic Code of Federal Regulations : [ecfr.gov/current/title-49/subtitle-B/chapter-III/subchapter-B/part-393](https://www.ecfr.gov/current/title-49/subtitle-B/chapter-III/subchapter-B/part-393) (checked November 2026)
- FMCSA SAFER : [safer.fmcsa.dot.gov/](https://safer.fmcsa.dot.gov/) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Related

- [Machinery transport](https://machinerymovingnv.com/services/machinery-transport/)
- [Fallon, NV](https://machinerymovingnv.com/areas/fallon/)
- [Machinery moving in Fallon](https://machinerymovingnv.com/areas/fallon/machinery-moving/)
- [Industrial rigging in Fallon](https://machinerymovingnv.com/areas/fallon/rigging/)
- [Millwright services in Fallon](https://machinerymovingnv.com/areas/fallon/millwright-services/)
- [Fallon, NV](https://machinerymovingnv.com/areas/fallon/)
- [Machinery moving in Fallon](https://machinerymovingnv.com/areas/fallon/machinery-moving/)
- [Machinery transport](https://machinerymovingnv.com/services/machinery-transport/)
- [Equipment trailers to 50 tons](https://machinerymovingnv.com/equipment/trailers/)
- [Nevada oversize load permits explained](https://machinerymovingnv.com/guides/nevada-oversize-load-permits/)

## Machinery transport in Fallon: questions

[All questions](https://machinerymovingnv.com/faq/)

### What is the route from Carson City to Fallon?

US-50 east through Dayton and Silver Springs, 61.3 road miles.

### Does ILS own the trucks that go to Fallon?

Local transportation runs on ILS trucks. Long distance is through a network of trucking companies.
