---
title: Industrial Rigging in Minden, NV | ILS
url: https://machinerymovingnv.com/areas/minden/rigging/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Service area](https://machinerymovingnv.com/areas/)
- [Minden](https://machinerymovingnv.com/areas/minden/)
- Industrial rigging

# Industrial rigging in Minden, Nevada

ILS rigs machinery in Minden under Nevada license 0083125 (C-14I Rigging and Cranes), with forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms, a 2-ton portable aluminum gantry and a 300-ton hydraulic gantry system. The gear comes 18.8 miles down US-395 from the Carson City yard, and estimates are free.

- **From the Goni Road yard:** 18.8 miles road distance, OpenStreetMap routing

- **Elevation:** 4,709 ft USGS 3DEP

- **County:** Douglas County US Census Bureau

- **Population:** 3,707 ACS 5-year 2024

- **Manufacturing establishments:** 44 ZIP 89423, County Business Patterns 2023

Key points

- Forklifts with rigging booms, 3,000 lbs. to 100,000 lbs.
- 2-ton portable aluminum gantry for tight spots
- 300-ton hydraulic gantry system where a forklift will not do
- Slings and hardware checked under 29 CFR 1910.184
- Elevation about 4,709 ft; 18.8 road miles from the yard

Rigging is the part of a move where the weight is actually in the air. ZIP 89423 has 44 manufacturing establishments (CBP 2023), and the rigging questions are about doors, slabs and headroom.

## Choosing the lift method for a Minden shop

The general method is on our [rigging](https://machinerymovingnv.com/services/rigging/) page. A flat slab and a roll-up or dock door suit a forklift with a rigging boom. The question is what the slab will carry. A loaded forklift concentrates weight on small contact areas, and a thin or cracked slab may call for plating or a different method. Our [floor loads and foundations guide](https://machinerymovingnv.com/guides/floor-loads-and-foundations/) explains how that is checked.

- Open floor, good slab: forklift and rigging boom
- Low headroom or a slab that cannot take a forklift: portable aluminum gantry, skates and rollers
- Very heavy single pieces: the 300-ton hydraulic gantry system
- Machines going up onto a trailer: loading with forks, boom or gantry

## Minden rigging in numbers

County Business Patterns for 2023 shows 457 establishments in ZIP 89423, with 44 in manufacturing and 65 in construction. Those two groups are the usual sources of rigging work: shop machines that have to be lifted and set, and construction-side equipment such as tanks, panels and mechanical units.

Minden rigging in numbers Measure Minden (ZIP 89423) Source

Manufacturing establishments 44 CBP 2023

Construction establishments 65 CBP 2023

Wholesale establishments 25 CBP 2023

Elevation about 4,709 ft USGS 3DEP

Road miles from the yard 18.8 a free-flow driving-time estimate

## Gear, inspection and standards

Slings, shackles and hoists are inspected before use and removed from service if damaged. OSHA 1910.184 covers slings in general industry and 1926.251 applies on construction sites. The ASME B30 standards set the design and use expectations for rigging hardware and gantries. Protective gear and safety training are the baseline, and we agree the lockout with your own maintenance staff before anything is lifted.

## From the lift to the finished machine

A lift that ends with a machine on a new pad is rarely finished until it is leveled. ILS holds Nevada license 0046276 in the C-33 Installing Industrial Machinery classification, and the same crew can level with optical levels, theodolites and laser levels. See [millwright services in Minden](https://machinerymovingnv.com/areas/minden/millwright-services/) for that side of the work.

## What to send for a rigging estimate

The estimate is free.

- Machine type, nameplate and weight
- Where the machine sits now and where it goes, with door and ceiling heights
- Photos of the floor, the route and anything overhead
- Whether the lift is inside a building or in a yard

### Sources (3)

- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.184](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.184) (checked November 2026)
- ASME : [asme.org/codes-standards/find-codes-standards/b30-9-slings](https://www.asme.org/codes-standards/find-codes-standards/b30-9-slings) (checked November 2026)
- U.S. Census Bureau : [api.census.gov/data/2023/cbp](https://api.census.gov/data/2023/cbp) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Related

- [Industrial rigging](https://machinerymovingnv.com/services/rigging/)
- [Minden, NV](https://machinerymovingnv.com/areas/minden/)
- [Machinery moving in Minden](https://machinerymovingnv.com/areas/minden/machinery-moving/)
- [Millwright services in Minden](https://machinerymovingnv.com/areas/minden/millwright-services/)
- [Machinery transport in Minden](https://machinerymovingnv.com/areas/minden/machinery-transport/)
- [Minden, NV](https://machinerymovingnv.com/areas/minden/)
- [Machinery moving in Minden](https://machinerymovingnv.com/areas/minden/machinery-moving/)
- [Industrial rigging](https://machinerymovingnv.com/services/rigging/)
- [Forklifts with rigging booms (3,000 to 100,000 lbs.)](https://machinerymovingnv.com/equipment/rigging-forklifts/)
- [2-ton portable aluminum gantry](https://machinerymovingnv.com/equipment/portable-gantry/)

## Industrial rigging in Minden: questions

[All questions](https://machinerymovingnv.com/faq/)

### Can ILS rig a machine inside a Minden shop?

Yes. Forklifts with rigging booms and the portable gantry are made for working inside buildings, and the plan is built around your door sizes, slab and headroom.

### What is the heaviest load ILS can rig?

ILS has the capacity of moving and relocating equipment weighing up to 300 tons. The method for your machine comes out of the estimate.
