---
title: Cribbing: Blocking Heavy Loads | ILS
url: https://machinerymovingnv.com/glossary/cribbing/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Glossary](https://machinerymovingnv.com/glossary/)
- Cribbing

# Cribbing

Cribbing is the stack of blocks that holds a machine while it is lifted in stages. The machine is never trusted to the jack alone, so each stroke is followed by another layer.

Key points

- Blocks stacked in crossing layers
- Spreads load onto the floor
- Used when lifting by jack or gantry
- Raised one stage at a time

The crib is built like a log cabin, each layer turned a quarter turn from the one below. This shape is stable, spreads load and keeps the machine from sliding if it moves.

## Good cribbing

- Solid, undamaged material
- Flat, stable base on a level surface
- Crossing layers, not loose stacks
- Cribbing sized to the load and floor

## Why it matters at your plant

Concrete floors have rated capacities and point loads can punch through slabs or damage pits and drains. Cribbing and steel plates spread the load. Tell the estimator about floor conditions, trenches and slab thickness.

## Link to ILS work

Raising a machine on a hydraulic gantry or jacks means cribbing at every stage; see [hydraulic gantry](https://machinerymovingnv.com/glossary/hydraulic-gantry/). ILS's published tools include rigging, slings, hoists and a large inventory of hand tools, and engineering services and foundations are part of a full relocation, as ILS describes it. ASME B30.1 covers the jacks and gantries that cribbing backs up.

### Sources (2)

- ASME : [asme.org/codes-standards/find-codes-standards/b30-1-jacks-industrial-rollers-air-casters-h](https://www.asme.org/codes-standards/find-codes-standards/b30-1-jacks-industrial-rollers-air-casters-hydraulic-gantries) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1926/1926.251](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.251) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Related

- [Hydraulic gantry](https://machinerymovingnv.com/glossary/hydraulic-gantry/)
- [Toe jack](https://machinerymovingnv.com/glossary/toe-jack/)
- [Industrial rigging](https://machinerymovingnv.com/services/rigging/)
- [Floor loads, anchors and machine foundations](https://machinerymovingnv.com/guides/floor-loads-and-foundations/)
- [Skidding](https://machinerymovingnv.com/glossary/skidding/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### Can any wood be used?

No. The material has to be sound and sized for the load. Rotted, split or oily wood is set aside.

### Does cribbing replace a jack rating?

No. It adds a second support so the lift does not depend on one device.
