---
title: Double-Drop Trailer: What It Is | ILS
url: https://machinerymovingnv.com/glossary/double-drop-trailer/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Glossary](https://machinerymovingnv.com/glossary/)
- Double-drop trailer

# Double-drop trailer

A double-drop trailer is a heavy-haul flatbed with a low well in the middle of the deck. The well sits close to the road, so very tall machines fit under bridges and wires.

Key points

- Three levels: high front, low well, high rear
- The well length limits how long a machine can sit in it
- Lowest deck height of the common flatbed types
- ILS publishes single-drop and double-drop equipment trailers to 50 tons
- Weight is spread over the axles, so axle spacing is part of the plan

Think of the trailer as three levels. The tractor pulls the front deck, the load rides in the well, and the rear deck sits over the axles and tires. Because the rear has to clear the wheels, the well is a fixed length, so the machine's footprint matters as much as its height.

## Why the well matters

Height is measured from the pavement to the top of the load. On a double-drop the machine's base is lower than on any flat deck, so a unit that is 11 feet tall on the floor of a plant may still travel inside the 14 foot limit in NRS 484D.605. A machine that has a long base, however, will not fit in a short well and may need a different trailer.

## What to know before loading

Wheeled and tracked machines can drive on at a ramp. Dead machinery is usually rolled or lifted on with a forklift or gantry.

- Get the machine's length, width, height and weight, with any overhangs
- Compare the base footprint to the well length
- Check where the machine's weight sits so the axles carry it evenly
- Plan the chains or straps at the machine's tie-down points
- Walk the route for low clearances and tight turns

## Published ILS equipment

Industrial Logistics Services lists single-drop and double-drop equipment trailers to 50 tons, along with removable gooseneck and beaver trailers to 50 tons, flat bed and step deck trailers, and local and over-the-road truck tractors. The estimate decides which one suits the load. Machines beyond 50 tons are a different conversation, starting with the published claim that ILS can move equipment weighing up to 300 tons.

### Sources (3)

- Nevada Legislature : [leg.state.nv.us/nrs/nrs-484d.html](https://www.leg.state.nv.us/nrs/nrs-484d.html) (checked November 2026)
- Nevada Legislature : [leg.state.nv.us/nac/nac-484D.html](https://www.leg.state.nv.us/nac/nac-484D.html) (checked November 2026)
- Federal Motor Carrier Safety Administration : [fmcsa.dot.gov/regulations](https://www.fmcsa.dot.gov/regulations) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Related

- [Step deck trailer](https://machinerymovingnv.com/glossary/step-deck-trailer/)
- [Lowboy trailer](https://machinerymovingnv.com/glossary/lowboy-trailer/)
- [Removable gooseneck (RGN)](https://machinerymovingnv.com/glossary/removable-gooseneck/)
- [Equipment trailers to 50 tons](https://machinerymovingnv.com/equipment/trailers/)
- [Machinery transport](https://machinerymovingnv.com/services/machinery-transport/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### What does double drop mean?

It means the deck drops twice: once from the front deck down into the well, and then back up over the rear axles.

### Can a double-drop carry a load wider than 102 inches?

Only with a permit. Width over 102 inches is oversize in Nevada, and NDOT issues the single-trip permit.
