---
title: Hydraulic Gantry: What It Is | ILS
url: https://machinerymovingnv.com/glossary/hydraulic-gantry/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Glossary](https://machinerymovingnv.com/glossary/)
- Hydraulic gantry

# Hydraulic gantry

A hydraulic gantry lifts with pressurized fluid instead of a chain hoist, which lets it raise very heavy loads smoothly and hold them in place. It is the choice when a machine is too heavy or too sensitive for a fork or a hoist.

Key points

- Lifts with hydraulic cylinders
- Slow, controlled, blocked at each stroke
- Used for the heaviest machines
- ILS publishes a 300-ton hydraulic gantry system

Where a chain hoist runs out of capacity, hydraulic cylinders keep going. They raise a load in short, even strokes, and the load is blocked or cribbed at each stage.

## How a lift works

- Place the legs on mats or a verified floor
- Attach the load at its lift points
- Raise one stroke and block the load
- Repeat to height, then travel or lower
- Set the load on its trailer or foundation

## Why it matters on Nevada moves

Presses, large stone saws, tanks and process equipment can weigh more than any forklift on site. A hydraulic gantry also works indoors where headroom is low, which suits older shops and warehouses around Carson City and the Carson Valley.

## The ILS system

ILS's equipment list names a 300-ton hydraulic gantry system, and the company states a capacity of moving and relocating equipment weighing up to 300 tons. Details are on the [300-ton hydraulic gantry system](https://machinerymovingnv.com/equipment/hydraulic-gantry/) page. The hydraulic gantry sits under the same ASME B30.1 family of standards as other jacking and gantry devices.

### Sources (2)

- ASME : [asme.org/codes-standards/find-codes-standards/b30-1-jacks-industrial-rollers-air-casters-h](https://www.asme.org/codes-standards/find-codes-standards/b30-1-jacks-industrial-rollers-air-casters-hydraulic-gantries) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1926/1926.251](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.251) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Related

- [300-ton hydraulic gantry system](https://machinerymovingnv.com/equipment/hydraulic-gantry/)
- [Gantry](https://machinerymovingnv.com/glossary/gantry/)
- [Cribbing](https://machinerymovingnv.com/glossary/cribbing/)
- [Industrial rigging](https://machinerymovingnv.com/services/rigging/)
- [Floor loads, anchors and machine foundations](https://machinerymovingnv.com/guides/floor-loads-and-foundations/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### Does a heavier lift take longer?

Hydraulic lifts are deliberate by design, so the estimate looks at the whole lift sequence.

### Can it work outdoors?

Yes, on a prepared surface that carries the leg loads.
