---
title: Machinery Moving and Rigging Glossary | ILS
url: https://machinerymovingnv.com/glossary/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- Glossary

# Machinery moving and rigging glossary

A machinery moving glossary defines the tools, trailers and trades of a heavy move: rigging, gantries, skates, lowboys, sling angles, leveling instruments and Nevada's oversize-load rules. Each entry gives a one-sentence definition, then why the term matters on a move in Northern Nevada.

## All pages in this section

[### Rigging Rigging is the use of slings, hardware, hoists and lifting equipment, planned for the load's weight and balance, to lift, lower, move or secure a heavy object. Read more](https://machinerymovingnv.com/glossary/rigging/)[### Millwright A millwright is a skilled tradesperson who installs, assembles, levels, aligns and dismantles industrial machinery. Read more](https://machinerymovingnv.com/glossary/millwright/)[### Gantry A gantry is a freestanding frame, usually a beam carried on two legs, that supports a hoist or lifting device over a load. Read more](https://machinerymovingnv.com/glossary/gantry/)[### Hydraulic gantry A hydraulic gantry is a gantry whose lifting is done by hydraulic cylinders or jacks, used to raise, lower and travel very heavy loads in slow, controlled steps. Read more](https://machinerymovingnv.com/glossary/hydraulic-gantry/)[### Machinery skates Machinery skates are low, load-rated rolling platforms, usually with steel or polyurethane rollers, placed under a machine to roll it across a floor. Read more](https://machinerymovingnv.com/glossary/machinery-skates/)[### Toe jack A toe jack is a hydraulic or mechanical jack with a low-profile toe that slides under the base of a heavy machine to lift it a few inches. Read more](https://machinerymovingnv.com/glossary/toe-jack/)[### Cribbing Cribbing is a stack of timber or engineered blocks, laid in alternating layers, that supports a lifted load and spreads its weight onto the floor. Read more](https://machinerymovingnv.com/glossary/cribbing/)[### Skidding Skidding is the practice of moving a heavy machine horizontally by sliding or rolling it on skids, rollers or skates instead of lifting it. Read more](https://machinerymovingnv.com/glossary/skidding/)[### Lowboy trailer A lowboy trailer is a flatbed trailer with a deck dropped close to the road between the axles, so tall and heavy machinery can be hauled within height limits. Read more](https://machinerymovingnv.com/glossary/lowboy-trailer/)[### Removable gooseneck (RGN) A removable gooseneck, or RGN, is a lowbed trailer whose front neck detaches and lowers to the ground, forming a ramp so equipment can be driven or pulled on. Read more](https://machinerymovingnv.com/glossary/removable-gooseneck/)[### Step deck trailer A step deck trailer is a flatbed with two levels: a short raised deck over the tractor and a longer, lower main deck behind it, which lets taller machinery stay under... Read more](https://machinerymovingnv.com/glossary/step-deck-trailer/)[### Double-drop trailer A double-drop trailer is a flatbed with a high front deck, a deeply lowered center well and a high rear deck over the axles, built to carry tall loads under legal... Read more](https://machinerymovingnv.com/glossary/double-drop-trailer/)[### Center of gravity The center of gravity is the single point at which the whole weight of a machine can be treated as acting, so a lift hooked directly above it hangs level and stable. Read more](https://machinerymovingnv.com/glossary/center-of-gravity/)[### Working load limit The working load limit (WLL) is the maximum weight a piece of rigging hardware, such as a sling, shackle or hoist, is rated to carry in normal service, set well below... Read more](https://machinerymovingnv.com/glossary/working-load-limit/)[### Sling angle Sling angle is the angle between a sling leg and the horizontal plane of the load; the lower the angle, the greater the tension in each leg for the same weight. Read more](https://machinerymovingnv.com/glossary/sling-angle/)[### Spreader bar A spreader bar is a rigid beam placed between the hook and the load that holds two or more sling legs apart so they hang vertical, keeping sideways compression off... Read more](https://machinerymovingnv.com/glossary/spreader-bar/)[### Theodolite A theodolite is an optical or electronic instrument on a tripod that measures horizontal and vertical angles very precisely, used in machine alignment to set lines... Read more](https://machinerymovingnv.com/glossary/theodolite/)[### Grouting Grouting is the placement of a flowable, non-shrinking material under a machine base plate or sole plate so it bears fully on the foundation and the load spreads evenly. Read more](https://machinerymovingnv.com/glossary/grouting/)[### Oversize load An oversize load is a vehicle and cargo that exceeds the legal limits on height, width, length or weight for public roads and can travel only with a permit and, when... Read more](https://machinerymovingnv.com/glossary/oversize-load/)[### Lockout/tagout Lockout/tagout (LOTO) is the set of procedures that isolate a machine from every energy source, lock the isolating devices and tag them, so the machine cannot start... Read more](https://machinerymovingnv.com/glossary/lockout-tagout/)

Key points

- Short definition at the top of every entry
- Tools and gear: gantry, skates, toe jack, cribbing
- Trailers: lowboy and removable gooseneck
- Public sources listed on each page

Industrial Logistics Services wrote these entries for plant managers, shop owners and maintenance staff who read an estimate or a permit and want to know what the words mean. The terms are explained in plain language and tied to public rules where a rule applies, such as ASME B30, OSHA and Nevada law.

## Lifting and moving terms

These entries cover how a machine is lifted, shifted and supported on the floor. Start with [rigging](https://machinerymovingnv.com/glossary/rigging/), then see the [gantry](https://machinerymovingnv.com/glossary/gantry/), the [hydraulic gantry](https://machinerymovingnv.com/glossary/hydraulic-gantry/), [machinery skates](https://machinerymovingnv.com/glossary/machinery-skates/), the [toe jack](https://machinerymovingnv.com/glossary/toe-jack/), [cribbing](https://machinerymovingnv.com/glossary/cribbing/) and [skidding](https://machinerymovingnv.com/glossary/skidding/).

## Trades and trailers

The [millwright](https://machinerymovingnv.com/glossary/millwright/) is the trade that sets and aligns a machine once it is in place. The [lowboy trailer](https://machinerymovingnv.com/glossary/lowboy-trailer/) and the [removable gooseneck](https://machinerymovingnv.com/glossary/removable-gooseneck/) are the trailer types that carry tall or heavy machines on the road.

### Sources (2)

- ASME : [asme.org/codes-standards/find-codes-standards/b30-9-slings](https://www.asme.org/codes-standards/find-codes-standards/b30-9-slings) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.184](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.184) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Related

- [Rigging](https://machinerymovingnv.com/glossary/rigging/)
- [Millwright](https://machinerymovingnv.com/glossary/millwright/)
- [Gantry](https://machinerymovingnv.com/glossary/gantry/)
- [Our equipment](https://machinerymovingnv.com/equipment/)
- [Guides](https://machinerymovingnv.com/guides/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### Are these terms specific to ILS?

No. They are the common terms of the machinery-moving trade. Where Industrial Logistics Services publishes equipment that relates to a term, the entry says so and links to that equipment page.
