---
title: Oversize Load in Nevada Defined | ILS
url: https://machinerymovingnv.com/glossary/oversize-load/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Glossary](https://machinerymovingnv.com/glossary/)
- Oversize load

# Oversize load

In Nevada a load is oversize when it is taller than 14 feet, wider than 102 inches or longer than 70 feet in a combination. The Nevada Department of Transportation issues the permits.

Key points

- Height over 14 feet (NRS 484D.605)
- Combination length over 70 feet (NRS 484D.615)
- Width over 102 inches (NRS 484D.685)
- Weight over the federal 80,000 lb limit also needs a permit
- Pilot cars are required above certain sizes (NAC 484D.670)

A machine that fits in the plant often does not fit on the road. Even after it is loaded as low as possible, its dimensions can push the whole rig past what the statutes allow. Knowing the limits before you pick a trailer saves reworks.

## The Nevada limits

Loads must also be non-reducible to get a permit. That means the machine cannot be taken apart or folded to get under the limit (NAC 484D.650).

The Nevada limits Dimension Legal limit without a permit Source

Height 14 feet NRS 484D.605

Combination length 70 feet NRS 484D.615

Width 102 inches NRS 484D.685

Gross weight 80,000 lbs. federal limit 23 CFR 658.17

## Permits and pilot cars

Single-trip and annual permits are issued by NDOT, and the application describes the vehicle, the load and the exact highways (NRS 484D.730). Large loads also need pilot cars. NAC 484D.670 sets the triggers, such as a load over 15 feet 6 inches high, a load wider than 12 feet on a two or three lane highway, and rear overhang beyond 25 feet. Crossing into California adds a Caltrans permit.

## Planning around it

Decks matter. A [step deck](https://machinerymovingnv.com/glossary/step-deck-trailer/) or double-drop trailer can bring a tall machine back under 14 feet and avoid a height permit. ILS lists those trailers, along with trailers to 50 tons, among its published equipment. Use the oversize load checker and send us the measurements for a free estimate.

### Sources (3)

- Nevada Legislature : [leg.state.nv.us/nrs/nrs-484d.html](https://www.leg.state.nv.us/nrs/nrs-484d.html) (checked November 2026)
- Nevada Legislature : [leg.state.nv.us/nac/nac-484D.html](https://www.leg.state.nv.us/nac/nac-484D.html) (checked November 2026)
- Caltrans : [dot.ca.gov/programs/traffic-operations/transportation-permits](https://dot.ca.gov/programs/traffic-operations/transportation-permits) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Related

- [Step deck trailer](https://machinerymovingnv.com/glossary/step-deck-trailer/)
- [Double-drop trailer](https://machinerymovingnv.com/glossary/double-drop-trailer/)
- [Nevada oversize load permits explained](https://machinerymovingnv.com/guides/nevada-oversize-load-permits/)
- [When a Nevada oversize load needs pilot cars](https://machinerymovingnv.com/guides/pilot-car-rules-nevada/)
- [Nevada oversize load checker](https://machinerymovingnv.com/tools/oversize-load-checker/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### What width is oversize in Nevada?

Anything wider than 102 inches needs an over-dimensional permit from NDOT.

### Does every oversize load need a pilot car?

No. The need depends on height, width, length and overhang, with thresholds in NAC 484D.670.
