---
title: Theodolite: What It Is | ILS
url: https://machinerymovingnv.com/glossary/theodolite/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Glossary](https://machinerymovingnv.com/glossary/)
- Theodolite

# Theodolite

A theodolite is a surveying instrument that reads angles. In a machine shop it sets reference lines so equipment can be aligned to each other and to the building.

Key points

- Measures horizontal and vertical angles
- Mounted on a tripod, leveled before use
- Sets reference lines for machinery alignment
- ILS lists optical levels and theodolites (1 arc second)
- Often used together with laser and spirit levels

A telescope sits on a base that rotates and tilts, and graduated circles show how far it has turned. Point it at a target and the angle is known to a fraction of a degree. That one capability, repeated, lets a crew place machine parts in a straight line or at a right angle.

## How it is used on machinery

After a machine is set, it is leveled and brought into line with its neighbors, with a conveyor, or with a shaft that has to turn true. Using the theodolite, the installer sets up a reference line along the floor or between points, then shifts the machine until its datum faces fall on that line. Square and plumb are checked the same way.

- Set up and level the instrument on a stable tripod
- Establish reference points on the floor or walls
- Sight targets on the machine
- Shim and adjust until readings match the drawing
- Recheck after the anchors are tightened

## What one arc second means

An arc second is 1/3,600 of a degree. At 100 feet, one arc second is about 0.006 of an inch (six thousandths) of sideways offset, which shows why the instrument suits precision work. Real accuracy also depends on setup, temperature and the technician.

## Instruments ILS publishes

ILS lists optical levels and theodolites (1 arc second), high accuracy laser levels, and spirit levels (accurate to .0005" in 12"). These support the C-33 Installing Industrial Machinery work the company is licensed for. See precision leveling and alignment for how the pieces fit.

### Sources (2)

- ngs.noaa.gov : [ngs.noaa.gov/](https://www.ngs.noaa.gov/) (checked November 2026)
- ASME : [asme.org/codes-standards/find-codes-standards/b30-9-slings](https://www.asme.org/codes-standards/find-codes-standards/b30-9-slings) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Related

- [Millwright](https://machinerymovingnv.com/glossary/millwright/)
- [Optical levels, theodolites & laser levels](https://machinerymovingnv.com/equipment/alignment-instruments/)
- [Precision leveling & alignment](https://machinerymovingnv.com/services/precision-alignment/)
- [How machines are leveled and aligned](https://machinerymovingnv.com/guides/how-machines-are-leveled/)
- [Machine installation & assembly](https://machinerymovingnv.com/services/machine-installation/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### Is a theodolite the same as a transit?

Close. A transit is an older, simpler type of theodolite. Modern units read angles optically or electronically.

### Do all machine installs need one?

No. Many machines need only a level. Theodolites matter when long lines, squareness or several machines must agree.
