---
title: Toe Jack: Low-Profile Machine Jack | ILS
url: https://machinerymovingnv.com/glossary/toe-jack/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Glossary](https://machinerymovingnv.com/glossary/)
- Toe jack

# Toe jack

A toe jack gets under a machine that sits close to the floor and raises one corner, so skates, rollers or blocks can be placed. It is the opening move in many floor-level lifts.

Key points

- Thin toe slides under low bases
- Lifts a corner a few inches
- Always followed by blocking
- Capacity must match the share of the weight

Most machines sit on a base with only an inch or two of clearance. A toe jack has a thin lip that fits that gap, which a regular bottle jack cannot do.

## Using one safely

- Check the machine's weight and where it is heaviest
- Pick the lift point on the base
- Raise a small amount with the toe seated fully
- Block the machine before anything goes under it
- Move to the next corner

## Why the rules matter

A jack lifts but does not hold. ASME B30.1 covers jacks, and the usual practice it reflects is that the load is supported by blocking, not by the jack alone, for any work beneath or beside it. A machine lifted unevenly can also shift, so corners are raised in stages.

## ILS and toe jacks

ILS publishes a large inventory of power and hand tools and of rigging gear. See [rigging, slings, hoists and tools](https://machinerymovingnv.com/equipment/rigging-gear/).

### Sources (2)

- ASME : [asme.org/codes-standards/find-codes-standards/b30-1-jacks-industrial-rollers-air-casters-h](https://www.asme.org/codes-standards/find-codes-standards/b30-1-jacks-industrial-rollers-air-casters-hydraulic-gantries) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1926/1926.251](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.251) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Related

- [Rigging, slings, hoists & tools](https://machinerymovingnv.com/equipment/rigging-gear/)
- [Machinery skates](https://machinerymovingnv.com/glossary/machinery-skates/)
- [Cribbing](https://machinerymovingnv.com/glossary/cribbing/)
- [Loading & unloading](https://machinerymovingnv.com/services/loading-unloading/)
- [How to prepare a machine before the riggers arrive](https://machinerymovingnv.com/guides/prepare-a-machine-for-moving/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### Is a toe jack the same as a floor jack?

No. A floor jack is taller and does not fit under low bases.

### Does a machine need to be empty first?

Fluids and loose parts are handled before lifting, as described in the preparation guide.
