---
title: Crating Machinery for Shipping | ILS Guide
url: https://machinerymovingnv.com/guides/crating-machinery-for-shipping/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Guides](https://machinerymovingnv.com/guides/)
- Crating machinery for shipping

# Crating machinery for shipping

Crate machinery when it will travel a long way, be handled several times or sit in storage; skid it when it needs a short trip on a truck. A good crate immobilizes the machine, keeps moisture out, spreads the load on a skid base and shows clearly where it can be lifted.

Key points

- Skidding is a base; crating is a full enclosure
- Moisture and vibration cause most transit damage
- Lifting points and center of gravity should be marked on the outside
- Export shipments may call for treated wood and paperwork
- Label contents, weight and handling instructions on at least two sides

A machine that arrives scratched, rusted or with a bent component may need repair before it can run. Crating prevents most of that. This guide describes common practice for packing industrial machinery. The right packaging for a specific machine depends on its design, so use the manufacturer's guidance when you have it.

## Skid, crate or wrap

The three options sit on a scale of protection. A skid is a heavy wood or steel base the machine is bolted or strapped to, so a forklift can lift it and it spreads weight on a trailer. A crate adds sides and a top, so the machine is enclosed. Wrapping adds a vapor barrier and padding on top of either.

For a machine going across town on a trailer, a skid with bracing and wrap may be enough. For long hauls, storage in open yards or any export leg, a full crate is usual.

Skid, crate or wrap Option Good for Notes

Skid only Short local moves, indoor handling Machine must be braced and secured to the base

Skid and wrap Trailer moves with weather exposure Barrier film and desiccant keep moisture off bare steel

Full crate Long hauls, storage, multiple handlings Needs lift points marked and a drawn center of gravity

## Preparing the machine

- Drain or secure fluids as the manual instructs, and cap open lines.
- Remove or lock loose parts, tool changers, spindles and moving axes.
- Coat bare steel with rust preventative where specified.
- Pad sharp edges and fragile controls; bag or remove electronics where the maker advises.
- Bolt the machine to the skid through its mounting holes or secure it with blocking and straps.
- Add the vapor barrier and desiccant before closing the crate.

## Building the crate

Crates are built to the load: heavier machines need heavier base timbers and diagonal bracing, and the machine should not be able to shift inside. Leave room for forklift tines or sling access, and mark where lifting is allowed.

International shipments generally require wood packaging to meet the international standard for treated wood (ISPM 15). Ask your carrier or the receiving party whether it applies to your move. On the road, the load and its crate must also be secured to the trailer under the federal cargo securement rules.

## Labeling

Photograph the machine before closing the crate. If a damage question comes up later, dated photos settle it quickly. Then mark the outside:

- Contents and machine name
- Gross weight, and the dimensions of the crate
- Center of gravity and permitted lifting points
- This side up and do not stack, where applicable
- Origin and destination

## What to send for a crating estimate

Tell the mover the machine type, the dimensions and weight, how far and by what route it will travel, and how long it may sit before it is unpacked. Photos of the machine from each side and of any fragile parts help the crew choose bracing and padding. If the machine is going overseas, say so at the start, since that changes the wood, the moisture protection and the paperwork.

## Crating and storage together

Machines sometimes wait between sites. ILS lists skidding and crating among its services and publishes up to 25,000 square feet of indoor storage and 5 acres of outside storage. A crate designed for outside storage needs a better moisture barrier than one for a dry building, so tell your mover how long the machine will sit and where. See [skidding and crating](https://machinerymovingnv.com/services/crating-skidding/) and [storing machinery long term](https://machinerymovingnv.com/guides/storing-machinery-long-term/).

### Sources (3)

- aphis.usda.gov : [aphis.usda.gov/plant-imports/wood-packaging-material](https://www.aphis.usda.gov/plant-imports/wood-packaging-material) (checked November 2026)
- Federal Motor Carrier Safety Administration : [fmcsa.dot.gov/regulations/cargo-securement](https://www.fmcsa.dot.gov/regulations/cargo-securement) (checked November 2026)
- Nevada Legislature : [leg.state.nv.us/nrs/nrs-484d.html](https://www.leg.state.nv.us/nrs/nrs-484d.html) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Keep reading

- [Skidding & crating](https://machinerymovingnv.com/services/crating-skidding/)
- [Machinery storage](https://machinerymovingnv.com/services/machinery-storage/)
- [Storing machinery long term](https://machinerymovingnv.com/guides/storing-machinery-long-term/)
- [How to prepare a machine before the riggers arrive](https://machinerymovingnv.com/guides/prepare-a-machine-for-moving/)
- [Specialized & long-distance transport](https://machinerymovingnv.com/services/specialized-transport/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### Does every machine need a crate?

No. Many machines move safely on a skid with bracing and wrap. A crate makes sense for long trips, storage or fragile equipment.

### Who should decide how to pack a machine?

Start with the manufacturer's instructions, then involve the mover. Both know where the machine is vulnerable.

### Do I need special wood for shipping?

For international shipments, treated wood meeting ISPM 15 is generally required. Domestic moves usually do not require it, but check with the carrier.
