---
title: Machinery Moving and Rigging Guides | ILS
url: https://machinerymovingnv.com/guides/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- Guides

# Guides to moving and rigging machinery

Nevada needs an NDOT permit for loads over 14 feet high, 102 inches wide or 70 feet long, and a licensed contractor to install machinery permanently attached to a building. These guides explain those rules and how a machinery move is measured, planned, rigged and leveled, with the public source for each.

## All pages in this section

[### How a machinery move works, step by step A machinery move runs in seven stages: estimate, site survey, planning, disconnect and lockout, rigging and loading, transport, and setting and leveling at the new... Read more](https://machinerymovingnv.com/guides/how-machinery-moving-works/)[### How to measure a machine for a moving estimate Measure the machine's overall length, width and height at its extreme points, find its weight on the nameplate or manual, and note where it can be lifted. Then... Read more](https://machinerymovingnv.com/guides/how-to-measure-a-machine/)[### How to prepare a machine before the riggers arrive Before the crew arrives, lock out the machine, have utilities disconnected, drain or secure fluids, tie down or remove loose parts, and photograph and label... Read more](https://machinerymovingnv.com/guides/prepare-a-machine-for-moving/)[### Lockout/tagout before a machinery move Before a machine is serviced, disconnected or lifted, the employer who owns it must isolate every energy source, lock or tag it, relieve stored energy and verify the... Read more](https://machinerymovingnv.com/guides/lockout-tagout-before-a-move/)[### Lift planning basics for plant managers A lift plan states what is being lifted, how much it weighs, how it will be rigged, what equipment will do the lifting, where it will travel and who is responsible... Read more](https://machinerymovingnv.com/guides/lift-planning-basics/)[### Nevada oversize load permits explained In Nevada a load that exceeds 14 feet in height, 70 feet in combination length or 102 inches in width needs a permit from the Nevada Department of Transportation, as... Read more](https://machinerymovingnv.com/guides/nevada-oversize-load-permits/)[### When a Nevada oversize load needs pilot cars Under NAC 484D.670, a lead pilot car is required for loads over 15 feet 6 inches high, over 12 feet wide on a two- or three-lane highway or in darkness or holiday... Read more](https://machinerymovingnv.com/guides/pilot-car-rules-nevada/)[### Moving machinery from Nevada into California A machine moving from Nevada into California travels under the carrier's federal authority, and an oversize or overweight load also needs a Caltrans transportation... Read more](https://machinerymovingnv.com/guides/moving-machinery-into-california/)[### Nevada contractor license classes for machinery work In Nevada, a company that contracts to install industrial machinery or to do rigging work for a fee generally needs a license from the State Contractors Board in a... Read more](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)[### How to choose a rigging contractor Choose a rigging contractor on evidence you can check: an active Nevada license in the right class, a written scope, a lift plan for your machine, and a crew that... Read more](https://machinerymovingnv.com/guides/choosing-a-rigging-contractor/)[### Planning a plant relocation Plan a plant relocation backward from the day production must restart, and sequence machines so the ones you need first are installed first. Most of the work happens... Read more](https://machinerymovingnv.com/guides/planning-a-plant-relocation/)[### Floor loads, anchors and machine foundations A floor can carry a machine if its rated load covers the machine's weight on the footprint it actually bears on, and an engineer decides that, not the mover. Machines... Read more](https://machinerymovingnv.com/guides/floor-loads-and-foundations/)[### How machines are leveled and aligned A machine is leveled by setting it on shims or leveling feet and measuring from machined reference surfaces until the readings fall within the maker's tolerance.... Read more](https://machinerymovingnv.com/guides/how-machines-are-leveled/)[### Crating machinery for shipping Crate machinery when it will travel a long way, be handled several times or sit in storage; skid it when it needs a short trip on a truck. A good crate immobilizes... Read more](https://machinerymovingnv.com/guides/crating-machinery-for-shipping/)[### Storing machinery long term To store a machine for months, keep it dry, support it on a firm surface, protect bare steel, and write down its condition before it goes in. Indoor storage is better... Read more](https://machinerymovingnv.com/guides/storing-machinery-long-term/)[### Rigging gear and how it is inspected Rigging gear is inspected before use, every time, by someone qualified to spot damage, and anything defective comes out of service. Slings must carry their rated... Read more](https://machinerymovingnv.com/guides/rigging-gear-and-inspection/)[### Northern Nevada manufacturing by county and ZIP Washoe County has the most manufacturing establishments in Northern Nevada, 466 in the Census Bureau's 2023 County Business Patterns, followed by Carson City with... Read more](https://machinerymovingnv.com/data/northern-nevada-manufacturing/)[### Nevada legal load limits and permit triggers A load in Nevada can travel without an over-dimensional permit up to 14 feet high, 70 feet long as a combination, and 102 inches wide, within the federal 80,000-pound... Read more](https://machinerymovingnv.com/data/nevada-oversize-limits/)[### Nevada oversize load checker Enter the height, width, length and weight of a loaded trailer, and the checker compares them with Nevada's legal limits to show whether the load likely needs an... Read more](https://machinerymovingnv.com/tools/oversize-load-checker/)[### Machine measuring worksheet Use the worksheet to record a machine's length, width, height, weight and lift points, and the doors, floors and clearances along its route. With those numbers, ILS... Read more](https://machinerymovingnv.com/tools/machine-measure-worksheet/)

Key points

- Start with the move guide if this is your first machinery relocation
- Measuring and preparing a machine are the two jobs that most often belong to the owner
- Lockout and lift planning explain who does what on the day
- Nevada permit and pilot car guides cite the actual NRS and NAC sections

Industrial Logistics Services writes these for plant managers, maintenance supervisors, shop owners and contractors who have a machine to move and want to know what a good job looks like. Every rule is cited to its public source so you can read the original yourself. For a quote on your own machine, the estimate is free.

## Planning a move

If you have never moved a production machine, begin with [how a machinery move works](https://machinerymovingnv.com/guides/how-machinery-moving-works/). It walks through the job from the first call to the final leveling. Then use [how to measure a machine](https://machinerymovingnv.com/guides/how-to-measure-a-machine/) and [how to prepare a machine before the riggers arrive](https://machinerymovingnv.com/guides/prepare-a-machine-for-moving/) to get your own part of the work done.

- Measuring a machine: length, width, height, weight, lift points and doors
- Preparing a machine: fluids, loose parts, covers, anchors and photos
- The sequence of a move, from estimate to set and level

## Safety on the day of the move

Two guides cover the safety side. [Lockout/tagout before a machinery move](https://machinerymovingnv.com/guides/lockout-tagout-before-a-move/) describes what OSHA 1910.147 requires and why the plant, not the mover, controls the energy sources. [Lift planning basics for plant managers](https://machinerymovingnv.com/guides/lift-planning-basics/) explains what goes into a plan for a heavy lift and what the ASME standards say about it.

## Hauling the load on the road

Once a machine is on a trailer it becomes a highway question. [Nevada oversize load permits explained](https://machinerymovingnv.com/guides/nevada-oversize-load-permits/) covers the height, length and width limits and the permit types. [When a Nevada oversize load needs pilot cars](https://machinerymovingnv.com/guides/pilot-car-rules-nevada/) lists the triggers for lead and rear escort vehicles, and [moving machinery from Nevada into California](https://machinerymovingnv.com/guides/moving-machinery-into-california/) covers the state line.

## More guides

Other guides in this library cover [Nevada contractor license classes](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/), [how to choose a rigging contractor](https://machinerymovingnv.com/guides/choosing-a-rigging-contractor/), [planning a plant relocation](https://machinerymovingnv.com/guides/planning-a-plant-relocation/), [floor loads and foundations](https://machinerymovingnv.com/guides/floor-loads-and-foundations/) and [how machines are leveled](https://machinerymovingnv.com/guides/how-machines-are-leveled/). For quick answers see the [questions and answers](https://machinerymovingnv.com/faq/) page, and for measuring help use the [machine measuring worksheet](https://machinerymovingnv.com/tools/machine-measure-worksheet/).

### Sources (3)

- Nevada Legislature : [leg.state.nv.us/nrs/nrs-484d.html](https://www.leg.state.nv.us/nrs/nrs-484d.html) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.147](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.147) (checked November 2026)
- ASME : [asme.org/codes-standards/find-codes-standards/b30-9-slings](https://www.asme.org/codes-standards/find-codes-standards/b30-9-slings) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Related

- [How a machinery move works, step by step](https://machinerymovingnv.com/guides/how-machinery-moving-works/)
- [Lift planning basics for plant managers](https://machinerymovingnv.com/guides/lift-planning-basics/)
- [Nevada oversize load permits explained](https://machinerymovingnv.com/guides/nevada-oversize-load-permits/)
- [Questions and answers](https://machinerymovingnv.com/faq/)
- [Nevada oversize load checker](https://machinerymovingnv.com/tools/oversize-load-checker/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### Are these guides legal or engineering advice?

No. They describe what the public rules and standards say, in plain language, so you can ask better questions. Always read the cited source, and for a specific lift or permit follow the actual text and the agency that issues it.

### Can ILS help with the machine in a guide?

Yes. ILS moves, rigs, hauls and installs machinery from its yard on Goni Road in Carson City, and estimates are free. Send the machine type, size, weight and addresses and the office takes it from there.

### How often are the rules checked?

Each guide names the section it relies on. Statutes and regulations change, so confirm the current text at the linked source before you plan a job around it.
