---
title: Machine Installation & Assembly in Nevada | ILS
url: https://machinerymovingnv.com/services/machine-installation/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Services](https://machinerymovingnv.com/services/)
- Machine installation & assembly

# Machine installation and assembly

Machine installation is setting a machine on its foundation, assembling it if it arrived in sections, anchoring it, leveling it and aligning it so it runs the way it was built to. ILS offers machine assembly and installation alongside its moving work, under a Nevada contractor license for installing industrial machinery.

Key points

- Assembly of machines delivered in sections
- Anchoring, shimming and leveling to manufacturer tolerances
- Turnkey installation and relocation projects
- C-33 Installing Industrial Machinery, license 0046276
- Optical levels and theodolites to 1 arc second, spirit levels accurate to .0005" in 12"

Moving machinery is one of our signature services, but we offer machine assembly and installation too, from turnkey installations to relocations. For a new purchase, a rearranged shop floor or a rebuilt line, the installation is where the machine starts earning, and the way it is set decides how well it holds its accuracy.

## What installation involves

Installation begins before the machine arrives. The foundation, anchor bolts, utilities and clearances have to match what the manufacturer calls for. When the machine comes in, it is rigged to its location, set on the pads or plates, and brought to level. Then it is anchored, grouted if required, and checked again, because anchoring can pull a machine out of level.

- Foundation and anchor review
- Placement and rough setting
- Assembly of components that shipped separately
- Leveling, anchoring and grouting
- Final alignment and walk-through

## Assembly of machines that arrive in pieces

Large presses, tanks, conveyors and processing lines often ship in sections to fit on a trailer or through a door. Putting them together takes rigging to hold each section in place while it is bolted, plus millwright work to make joints, frames and drives line up. We handle both, so assembly does not wait for a separate rigging crew to be scheduled.

## Installation and the Nevada contractor rules

Contracting to install industrial machinery that is permanently attached to a structure falls under NRS chapter 624 in Nevada, and the contractor needs the right classification. ILS holds C-33 (Installing Industrial Machinery), A-14 (Steel Erection and Industrial Machinery), A-20 (Industrial Piping), C-14I (Rigging and Cranes) and C-14J (Conveyance of Goods). Look any of them up on the Board's public search before you sign with anyone.

## Foundations, floors and anchors

A machine can be installed correctly and still fail to hold its level if the slab under it is too thin, cracked or poorly cured. Floor load and anchor type are worth settling at the start. Our [guide to floor loads, anchors and foundations](https://machinerymovingnv.com/guides/floor-loads-and-foundations/) covers the questions to ask, and ILS can arrange [engineering and foundations](https://machinerymovingnv.com/services/engineering-foundations/) as part of a project.

## Planning installation around other trades

A machine does not run until the electrician, the pipe fitter and often a controls technician have finished. Their work depends on where the machine lands, and ours depends on when their conduit and piping are ready. We ask early for the schedule and the drawings so that the order of work is agreed before the machine arrives, and so a reconnect crew is not waiting on a machine that is not yet leveled.

## What to send for an installation estimate

Send the manufacturer's installation manual or drawings, the machine's weight, a floor plan of where it goes, and photos of the location. Tell us what is already in place: slab, anchors, power, air or piping. Estimates are free.

### Sources (3)

- Nevada Legislature : [leg.state.nv.us/nrs/nrs-624.html](https://www.leg.state.nv.us/nrs/nrs-624.html) (checked November 2026)
- Nevada Legislature : [leg.state.nv.us/nac/nac-624.html](https://www.leg.state.nv.us/nac/nac-624.html) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.178](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.178) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Related services

- [Millwright services](https://machinerymovingnv.com/services/millwright-services/)
- [Precision leveling & alignment](https://machinerymovingnv.com/services/precision-alignment/)
- [Engineering & foundations](https://machinerymovingnv.com/services/engineering-foundations/)
- [Optical levels, theodolites & laser levels](https://machinerymovingnv.com/equipment/alignment-instruments/)
- [How machines are leveled and aligned](https://machinerymovingnv.com/guides/how-machines-are-leveled/)
- [Grouting](https://machinerymovingnv.com/glossary/grouting/)
- [Can ILS install and level the machine after the move?](https://machinerymovingnv.com/faq/installation-included/)
- [Machinery moving](https://machinerymovingnv.com/services/machinery-moving/)
- [Industrial rigging](https://machinerymovingnv.com/services/rigging/)
- [Millwright services](https://machinerymovingnv.com/services/millwright-services/)
- [Precision leveling & alignment](https://machinerymovingnv.com/services/precision-alignment/)
- [Plant & factory relocation](https://machinerymovingnv.com/services/plant-relocation/)
- [Dismantling & reinstallation](https://machinerymovingnv.com/services/dismantling-reinstallation/)

## Machine installation & assembly: questions

[All questions](https://machinerymovingnv.com/faq/)

### Can ILS install a machine that someone else delivered?

Yes. Send us the machine details and the location, and we will quote the installation separately from any transportation.

### Who connects the power, air and plumbing?

Who makes the utility connections is agreed in the estimate. We set, level and align the machine and coordinate the timing. Our [disconnect and reconnect coordination](https://machinerymovingnv.com/services/disconnect-reconnect/) page explains the handoff.

### What do you use to check that a machine is level?

Optical levels and theodolites (1 arc second), high accuracy laser levels, and spirit levels (accurate to .0005" in 12").
