---
title: Nevada Oversize Load Checker | ILS
url: https://machinerymovingnv.com/tools/oversize-load-checker/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [Guides](https://machinerymovingnv.com/guides/)
- Nevada oversize load checker

# Nevada oversize load checker

Enter the height, width, length and weight of a loaded trailer, and the checker compares them with Nevada's legal limits to show whether the load likely needs an over-dimensional permit or pilot cars. It is a planning guide only, and the Nevada Department of Transportation (NDOT) decides every permit.

Key points

- Measure the total height from the road, not from the deck
- Over 14 feet high, 102 inches wide or 70 feet long as a combination, a permit is likely needed
- Gross weight above 80,000 pounds also needs a permit
- The checker is a guide; NDOT decides
- Permit holders must follow the route and conditions written on the permit

The numbers behind the checker come straight from Nevada law. This page explains them, so you can see what the checker is doing and why it gives the answer it does. Measure the whole load as it will travel: the machine, the trailer deck and anything that sticks out.

## What the checker compares

If every number is at or below the limit, the load is within Nevada's height, width, length and gross-weight limits; axle weights and overhang can still require a permit, and NDOT has the final word. If any number is over, the checker flags that the load likely needs an NDOT over-dimensional permit and shows which pilot car triggers may apply.

What the checker compares What you enter Compared with Rule

Total height 14 feet NRS 484D.605

Total width 102 inches NRS 484D.685

Combination length 70 feet NRS 484D.615

Gross weight 80,000 pounds 23 CFR 658.17

## How to measure

- Height: from the road surface to the highest point of the load, including the trailer deck and any tie-down hardware or accessories on the machine
- Width: at the widest point of the load, including mirrors, rails and anything hanging out
- Length: the whole combination, from the front of the tractor to the rear of the load
- Weight: the machine, trailer, tractor, fuel and anything else aboard; the machine's nameplate weight is only one part

## This is a guide, not a permit

The checker cannot issue, approve or promise a permit. NDOT's Over Dimensional Vehicle Permits office decides, based on the application: the vehicle, the load, the exact route and the dates. Route restrictions, bridge limits, construction zones and seasonal rules can change an answer that looks simple on paper.

Nevada's pilot car rules (NAC 484D.670) kick in at larger sizes, and the table on our [legal load limits page](https://machinerymovingnv.com/data/nevada-oversize-limits/) lists them. The code text controls, and the checker's results are only as good as the numbers entered.

## Cutting a load down to size

A permit can sometimes be avoided by changing the plan. A lower deck, a different trailer, tilting or turning the machine, or taking off a removable part can bring a load within the limits. The code requires that a permitted load be non-reducible (NAC 484D.650), so this is the first question NDOT asks. Learn about trailer types on our [equipment trailers](https://machinerymovingnv.com/equipment/trailers/) page.

### Sources (3)

- Nevada Legislature : [leg.state.nv.us/nrs/nrs-484d.html](https://www.leg.state.nv.us/nrs/nrs-484d.html) (checked November 2026)
- Nevada Legislature : [leg.state.nv.us/nac/nac-484D.html](https://www.leg.state.nv.us/nac/nac-484D.html) (checked November 2026)
- Electronic Code of Federal Regulations : [ecfr.gov/current/title-23/chapter-I/subchapter-G/part-658/section-658.17](https://www.ecfr.gov/current/title-23/chapter-I/subchapter-G/part-658/section-658.17) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Related

- [Nevada legal load limits and permit triggers](https://machinerymovingnv.com/data/nevada-oversize-limits/)
- [Nevada oversize load permits explained](https://machinerymovingnv.com/guides/nevada-oversize-load-permits/)
- [When a Nevada oversize load needs pilot cars](https://machinerymovingnv.com/guides/pilot-car-rules-nevada/)
- [Equipment trailers to 50 tons](https://machinerymovingnv.com/equipment/trailers/)
- [Free estimate](https://machinerymovingnv.com/free-estimate/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### Does the checker issue a permit?

No. It is a guide. Only NDOT issues Nevada over-dimensional permits.

### What if my load is exactly at the limit?

Loads at or under the legal limits do not need a permit, but measure carefully. A small error can put you over.

### Does the checker cover California?

No. It uses Nevada rules. A load going into California needs a Caltrans permit if it is oversize there.
