---
title: Moving Conveyors and Material Handling | ILS
url: https://machinerymovingnv.com/what-we-move/conveyors/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [What we move](https://machinerymovingnv.com/what-we-move/)
- Conveyors & material handling

# Moving conveyors and material handling equipment

A conveyor system is moved by drawing the layout, taking it apart in labeled sections, hauling the sections and putting them back at the new site on a leveled floor. ILS holds the Nevada C-14J Conveyance of Goods classification and rigs with forklifts, lifts and hoists.

Key points

- The layout is drawn and each section labeled before teardown
- Motors, drives, controls and sensors are removed and crated
- Belts and chains are released and rolled or bundled
- Sections ride on pallets, flatbeds or curtain trailers
- Boom lifts, scissor lifts and material lifts reach overhead runs
- Free estimates

Conveyors, accumulation tables, pallet racks, sorters and spiral lines are long, repeated sections that run through a building. They are not very heavy per foot, but a full system is a huge number of parts. Industrial Logistics Services uses its dismantling, reinstallation and installation capabilities to relocate these systems.

## The job is mostly planning

The hardest part of a conveyor system is its sheer number of pieces. A line may include hundreds of identical-looking sections with supports and guards, plus transfers, curves, merges and controls. If they are not labeled, rebuilding takes far longer. A good move starts with a drawing or photographs, numbers each section, and tags the cables and sensors.

Overhead conveyors need access equipment. ILS lists boom lifts, scissor lifts and material lifts among its equipment, covered on the [aerial lifts](https://machinerymovingnv.com/equipment/aerial-lifts/) page.

## Dismantling in the right order

The plant locks out power and controls (29 CFR 1910.147). Then the line is taken down from the end of the flow backward, so supports are never removed from sections still in place. OSHA's rule on handling materials at 29 CFR 1910.176 and the ASME B20.1 safety standard for conveyors apply to conveyors in general industry.

- Drawing or photo record of the full layout
- Lock out and disconnect power, air and control cables
- Label each section, guard and support
- Release belt tension and remove belts or chains
- Remove motors, reducers, sensors and electric eyes and crate them
- Unbolt and lift sections, stack them and strap them for trucking

## Hauling

Sections are loaded on pallets or skids and stacked on flatbeds or curtain trailers, and long straight pieces can ride lengthwise. Curtain trailers and day cabs are on the published equipment list, which you can see on the [truck tractors and curtain trailers](https://machinerymovingnv.com/equipment/truck-tractors/) page. A large line may need several loads, and ILS plans how many from the layout.

## Reinstalling

Conveyor frames are re-leveled and anchored to the new floor so that belts track and transfers line up. The A-14 classification under license 0083124 covers steel erection and industrial machinery, and C-33 under license 0046276 covers installing industrial machinery. C-14J, the Board's classification for installing conveyor systems, is held under license 0083125. Belts are retensioned and the electrician reconnects controls. See [dismantling and reinstallation](https://machinerymovingnv.com/services/dismantling-reinstallation/) for the full approach.

## What to send for an estimate

Send the layout or photos, approximate length, belt widths, the number of drives and the destination. Estimates are free.

### Sources (4)

- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.176](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.176) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.147](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.147) (checked November 2026)
- ASME : [asme.org/codes-standards/find-codes-standards/b30-9-slings](https://www.asme.org/codes-standards/find-codes-standards/b30-9-slings) (checked November 2026)
- Nevada State Contractors Board : [app.nvcontractorsboard.com/Clients/NVSCB/Public/ContractorLicenseSearch/ContractorLicenseS](https://app.nvcontractorsboard.com/Clients/NVSCB/Public/ContractorLicenseSearch/ContractorLicenseSearch.aspx) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Related

- [Dismantling & reinstallation](https://machinerymovingnv.com/services/dismantling-reinstallation/)
- [Machine installation & assembly](https://machinerymovingnv.com/services/machine-installation/)
- [Boom lifts, scissor lifts & material lifts](https://machinerymovingnv.com/equipment/aerial-lifts/)
- [Warehouses & distribution centers](https://machinerymovingnv.com/industries/warehouses-and-distribution/)
- [Planning a plant relocation](https://machinerymovingnv.com/guides/planning-a-plant-relocation/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### Do you move pallet racking?

Yes, racks and shelving are part of material handling. Send quantities and photos.

### Can you reinstall the conveyor at the new site?

ILS dismantles, hauls and reinstalls conveyors and levels them. Who reconnects the controls is agreed in the estimate.

### What is C-14J?

C-14J Conveyance of Goods is the Nevada State Contractors Board classification for fabricating and installing conveyor systems, dock levelers and pallet racks (NAC 624.310). ILS holds it under license 0083125.
