---
title: Printing Press Moving in Northern Nevada | ILS
url: https://machinerymovingnv.com/what-we-move/printing-presses/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [What we move](https://machinerymovingnv.com/what-we-move/)
- Printing presses

# Moving printing presses

A printing press is moved by taking it apart at its unit joints, protecting rollers and cylinders, rigging each unit from its base and rebuilding the line level and in register at the new site. ILS rigs, hauls and sets plant machinery and uses forklifts with rigging booms, gantries and equipment trailers to 50 tons.

Key points

- Large presses are separated at the unit joints
- Rollers, plates and cylinders are removed or protected
- Each unit is lifted from its base, never by a roller or guard
- The line is re-leveled and re-aligned unit to unit
- Folders, cutters and bindery lines move on skates or trailers
- Free estimates

Offset presses, digital presses, folders, cutters and bindery lines belong in a printing plant, and most are sold as a line of connected units. The rollers and cylinders are precise, and the frames are heavy cast iron or steel. Industrial Logistics Services moves printing plants and print shops and works from the maker's drawings wherever they exist.

## A press is a line, not a single machine

A multicolor offset press is made of printing units, a feeder, a delivery and often a coater or dryer. These bolt to each other and to the floor. When the line is relocated, each unit is split from the next, moved separately and put back in the same order. Getting the units back in alignment is what makes the press print well again.

Smaller digital presses and cutters are far lighter but sensitive, so they move wrapped, on a pallet or skid, with their covers and trays secured.

## Preparing the press

The plant locks out power, air and any gas or vacuum supplies under 29 CFR 1910.147 before the crew begins. Press operators and the maker's service technician normally decide what comes off the press first. Typical preparation includes:

- Washing down inks and solutions and draining dampening systems
- Removing plates, blankets and ink rollers to a safe container
- Locking cylinders and gears in the maker's transit position
- Labeling every cable, air line and sensor connector
- Photographing the unit joints and the floor anchors
- Measuring the building's doors, dock heights and aisles

## Rigging and trucking

Units are lifted from the base or through the maker's lift points with slings and a rigging boom on a forklift, or moved on machinery skates and rollers across the plant floor. A hydraulic gantry takes the heaviest frames. ILS has the capacity of moving and relocating equipment weighing up to 300 tons, and its equipment trailers run to 50 tons. Sling and hardware rules are in 29 CFR 1910.184 and the ASME B30 standards.

Press lines are long, so a move often needs more than one trailer. Check the [machinery transport](https://machinerymovingnv.com/services/machinery-transport/) page for how ILS hauls loads on its own trucks.

## Setting and aligning

A printing press has to stand level and the units have to share one reference. ILS uses optical levels and theodolites (1 arc second), high accuracy laser levels and spirit levels accurate to .0005" in 12" for the setting. The press maker's technician handles register, impression and test printing after the machine is stable. The [guide to leveling machines](https://machinerymovingnv.com/guides/how-machines-are-leveled/) explains the method.

## What to send

For an estimate, send a list of the units and auxiliary machines, the maker and model if known, approximate weights, photos of the press room and the exit path, and the new address. Estimates are free.

ILS moves printing presses across Northern Nevada, including Reno, Sparks, the Tahoe-Reno Industrial Center, Carson City and the Carson Valley, from its yard in Carson City.

### Sources (3)

- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.147](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.147) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.184](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.184) (checked November 2026)
- ASME : [asme.org/codes-standards/find-codes-standards/b30-9-slings](https://www.asme.org/codes-standards/find-codes-standards/b30-9-slings) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Related

- [Plant & factory relocation](https://machinerymovingnv.com/services/plant-relocation/)
- [Dismantling & reinstallation](https://machinerymovingnv.com/services/dismantling-reinstallation/)
- [Equipment trailers to 50 tons](https://machinerymovingnv.com/equipment/trailers/)
- [Printing plants & shops](https://machinerymovingnv.com/industries/printing/)
- [Planning a plant relocation](https://machinerymovingnv.com/guides/planning-a-plant-relocation/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### Can you move an entire print shop?

ILS plans plant moves with the machines, shelving and finishing equipment. See the plant relocation page for the process.

### Do you take apart a multi-unit press?

Units are separated at their joints following the maker's instructions and then rebuilt in order at the new site.

### Will the press need a technician afterward?

Usually. The press maker or a qualified technician checks register and printing after ILS has set and leveled the line.
