---
title: Moving Food and Beverage Processing Lines | ILS
url: https://machinerymovingnv.com/what-we-move/processing-lines/
business: Industrial Logistics Services, Inc. (ILS)
what: machinery moving, rigging, millwright services, installation and alignment, plant relocation, machinery transport, crating, storage
phone: (775) 882-3319
fax: (775) 882-2693 (fax only)
email: johns@ilsmachinerymoving.com
address: 3868 Goni Rd, Carson City, NV 89706
hours: Mon-Fri 7:00 am - 4:00 pm, Sat-Sun closed
licenses: Nevada contractor licenses 0046276, 0083124, 0083125; USDOT 642556, MC-531191
estimates: free
---

- [Home](https://machinerymovingnv.com/)
- [What we move](https://machinerymovingnv.com/what-we-move/)
- Food & beverage processing lines

# Moving food and beverage processing lines

A processing line is moved by mapping it first, then taking it apart in sections, protecting stainless surfaces and sanitary fittings, and rigging each piece from the frame. ILS lists Food and Beverage Processing Plants among its industries and rigs with chain hoists, forklifts to 100,000 lbs. with rigging booms and gantries.

Key points

- The line is mapped and photographed before it is taken apart
- Sanitary fittings, gaskets and instruments are protected and bagged
- Stainless surfaces are padded so they are not scratched
- Chain hoists and forklifts rig equipment inside tight plants
- Plant sanitation and food safety rules stay with the plant
- Free estimates

A food or beverage line is a chain of machines that handle a product: mixers, kettles, pumps, fillers, cappers, conveyors, tanks and packaging. Almost everything is stainless steel with sanitary fittings. Industrial Logistics Services moves, rigs and sets process equipment and works with plant maintenance and the line's own technicians.

## Why a line is moved in sections

Process equipment is connected by piping, conveyors and controls, and the order of the connections matters. Before anything is lifted, the line is drawn out, with each machine numbered and each connection tagged, so it can be rebuilt in the same sequence at the new site. This is a larger task than moving a single machine, and the plan is the most valuable part of the job.

Heavy pieces such as mixers, kettles, homogenizers and fillers are lifted from frames or skids. Light stainless parts are padded and crated.

## Cleaning, draining and disconnecting

The plant is responsible for cleaning and sanitizing equipment and for its food safety program, including the FDA's current good manufacturing practice rules in 21 CFR Part 117. Movers do not decide what is clean enough. What the mover needs is equipment that is empty, drained and locked out (29 CFR 1910.147).

- Run the line empty and clean it according to the plant's program
- Drain tanks, pumps, heat exchangers and piping low points
- Lock out electrical, steam, compressed air and refrigeration
- Remove and bag sanitary clamps, gaskets, spray balls and sensors
- Tag and photograph pipe and cable connections
- Plan the route, since process rooms often have drains, curbs and tight doors

## Rigging in a working plant

Food plants are low-ceilinged, with wet floors, drains and washdown equipment. Chain hoists, a 2-ton portable aluminum gantry, machinery skates and low-profile forklifts do work that a larger machine cannot. Rigging gear is inspected before use under 29 CFR 1910.184, and forklift operators are trained under 29 CFR 1910.178. See [rigging gear](https://machinerymovingnv.com/equipment/rigging-gear/).

Because stainless is easily scratched, slings are padded and steel forks are covered or kept off the surface.

## Setting up the new line

The floor needs drainage, slope and strength for the equipment. Equipment is placed on its footprint, leveled, and anchored where the maker requires. Piping, wiring and sanitary connections are reassembled by the plant's team or contractors, often with ILS rigging parts into position as the line is rebuilt. ILS holds an A-20 Industrial Piping classification under license 0083124, listed on the [machine installation](https://machinerymovingnv.com/services/machine-installation/) page.

## What to send

A line drawing or layout, a list of machines with approximate weights, photos of the plant and the path out, and the new address. If the plant needs the line back in production on a date, say so in the estimate request. Estimates are free.

### Sources (4)

- Electronic Code of Federal Regulations : [ecfr.gov/current/title-21/chapter-I/subchapter-B/part-117](https://www.ecfr.gov/current/title-21/chapter-I/subchapter-B/part-117) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.147](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.147) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.184](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.184) (checked November 2026)
- U.S. Occupational Safety and Health Administration : [osha.gov/laws-regs/regulations/standardnumber/1910/1910.178](https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.178) (checked November 2026)

### Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

[Start the estimate](#estimate)

### Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

[What the classes cover](https://machinerymovingnv.com/guides/nevada-contractor-license-classes/)

### Related

- [Plant & factory relocation](https://machinerymovingnv.com/services/plant-relocation/)
- [Disconnect & reconnect coordination](https://machinerymovingnv.com/services/disconnect-reconnect/)
- [Rigging, slings, hoists & tools](https://machinerymovingnv.com/equipment/rigging-gear/)
- [Food & beverage processing](https://machinerymovingnv.com/industries/food-and-beverage/)
- [Tanks & silos](https://machinerymovingnv.com/what-we-move/tanks-and-silos/)

## Questions we hear

[All questions](https://machinerymovingnv.com/faq/)

### Who cleans the equipment before the move?

The plant cleans and sanitizes its own equipment. ILS needs it emptied, drained and locked out.

### Can you move stainless tanks too?

Yes. See the page on tanks and silos for how they are lifted, tilted and hauled.

### Do you rebuild the line at the new plant?

ILS sets and levels the equipment. Process piping and controls are reconnected by the plant's own technicians or contractors.
