3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Boom lifts, scissor lifts and material lifts

ILS lists boom lifts, scissor lifts and material lifts among its equipment. Boom and scissor lifts raise people to overhead work, and material lifts raise parts and components to a working height.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Key points

  • Boom lifts, scissor lifts and material lifts
  • For overhead disconnects, hookups and rigging points
  • Platforms for people and lifts for parts are different tools
  • Fall protection and operator training rules apply
  • Used alongside the forklifts and gantries that do the heavy lifting

Moving a machine often includes work well above the floor: disconnecting overhead ductwork, power drops or piping, hanging a lifting point, or reaching a machine's top. Industrial Logistics Services keeps lifts on hand so the crew can do that work from a stable platform instead of a ladder.

What each lift is for

  • Boom lifts reach up and out. The arm lets the platform get over equipment or around an obstacle to reach work that is not directly above the base.
  • Scissor lifts raise a platform straight up on crossed supports. They give a larger platform and are well suited to work along a wall or over a clear floor.
  • Material lifts raise parts, tools and components to height without putting a person up there with them.

None of these is used to lift a machine. That is the job of a forklift with a rigging boom or a gantry.

Why a lift beats a ladder

Taking down an overhead conduit run, a duct or an exhaust stack, or setting a lift point, means working above head height for a stretch of time. A lift platform gives a guardrail, a stable floor and room for tools. It also puts the work at the right height, so the person does it carefully instead of reaching.

Safety rules that apply

OSHA's construction standard on aerial lifts (29 CFR 1926.453) requires fall protection for people on boom-type platforms, limits the weight on the platform to the manufacturer's rating and requires that the operator be trained. General industry has parallel rules for vehicle-mounted elevating work platforms (29 CFR 1910.67). The ANSI/SAIA A92 series covers the design and use of aerial work platforms.

Floors and ground matter here too. A lift concentrates weight on its wheels, so we check slabs, trenches and slopes, and we watch for overhead power lines and sprinklers.

Planning around the lift

Tell us about ceiling height, door width and any restrictions on tire marks or battery-powered equipment in the area. Some food, lab and clean-room spaces require electric lifts with non-marking tires. If the work is in a live plant, we coordinate the work zone with your team so nobody walks under it.

Sources (3)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

What the classes cover

FAQ

Questions we hear

All questions

Do you use lifts to move machines?

No. Lifts are for overhead access and for parts. Machines are lifted with forklifts and rigging booms, gantries and skates.

Can you work in a food or lab area?

Tell us the requirements ahead of time, such as non-marking tires or no engine exhaust, and we will plan the work to match.

Is fall protection needed on a scissor lift?

Rules differ between boom lifts and scissor lifts and between industries. The lift's manufacturer and OSHA 1926.453 govern, and the plant's own policy governs where it is stricter.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.