3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Specialized and long-distance transport

Specialized transport moves loads that exceed legal size or weight, or that need special trailers, permits or escorts. ILS provides specialized equipment transportation on its own trailers rated to 50 tons, and long distance transportation through a network of trucking companies.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Key points

  • Nevada permit triggers: over 14 ft high, 70 ft long or 102 in. wide
  • Pilot car requirements set by NAC 484D.670
  • Single-drop and double-drop trailers and removable gooseneck trailers to 50 tons
  • Long distance through a network of trucking companies
  • Caltrans permits needed for oversize loads crossing into California

Most industrial machines do not fit in a standard van. When one is taller, wider, longer or heavier than the law allows without a permit, the trip has to be planned before the truck is loaded. ILS has experience planning those moves and works with the state permit offices and escort drivers needed to run them.

What makes a load specialized

A load is oversize when it exceeds the legal limits for height, width, length or weight. In Nevada the common thresholds are 14 feet in height (NRS 484D.605), 70 feet for a combination of vehicles (NRS 484D.615) and 102 inches in width (NRS 484D.685). Over the federal limit of 80,000 pounds gross, the load needs an over-dimensional permit too.

What makes a load specialized
DimensionLegal without a permitSource
Height14 ftNRS 484D.605
Combination length70 ftNRS 484D.615
Width102 in.NRS 484D.685
Gross weight80,000 lbs. (federal)23 CFR 658.17

Permits and pilot cars

The Nevada Department of Transportation issues single-trip and annual multiple-trip permits for over-dimensional loads. The load must generally be non-reducible, meaning it cannot be made smaller without damaging it (NAC 484D.650). The permit application describes the vehicle, the load and the exact highways, and the permit sets the conditions. Pilot cars are required once the load passes the dimensions in NAC 484D.670. Read the details in our guide to pilot car rules.

Planning a specialized move

The route is part of the plan. Overpasses, wires, bridges, construction zones and tight turns can rule out a highway that looks fine on a map. The permit office has the final say on the route, and the driver follows the permit.

  1. Measure the load on its trailer, not on the floor
  2. Choose the trailer and the lowest safe deck height
  3. Check the route for height, width and weight limits
  4. Apply for the state permit and arrange any escort
  5. Confirm times and conditions printed on the permit
  6. Load, secure and haul

Across state lines

Each state issues its own permits, so an oversize load going into California needs a Caltrans transportation permit as well as a Nevada permit. Our guide on moving machinery into California covers what changes at the line. ILS transports machinery into California and quotes installation work in California case by case.

Reducing a load instead of permitting it

Sometimes the quickest way to a legal trip is to make the load smaller. Taking off a tall guard, a conveyor section or a control cabinet can bring a machine under 14 feet or 102 inches. Nevada treats a load as non-reducible when it cannot be made smaller without damage, and permits are written for those loads. We look at both options and tell you which one is practical.

What to send for a specialized transport estimate

Send the machine's dimensions and weight, the pickup and delivery addresses, and whether it can be partly disassembled to reduce the size. Photos of both loading areas are helpful. Our oversize load checker gives a quick read on whether your load will need a permit. Estimates are free.

Sources (3)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

What the classes cover

FAQ

Specialized & long-distance transport: questions

All questions

What size load needs a permit in Nevada?

Over 14 feet high, over 70 feet long as a combination, or over 102 inches wide needs an NDOT permit. Check NRS 484D and NAC 484D for the current rules.

Does ILS arrange pilot cars?

Pilot cars are part of planning a permitted move. The motor carrier that moves the load applies for the NDOT over-dimensional permit; when the load travels on ILS trucks, the estimate lists the permit and any pilot cars it requires.

Can ILS ship machinery long distance?

Yes, through a network of trucking companies, with ILS coordinating the lift and the arrangement.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.