3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Machinery moving and rigging glossary

A machinery moving glossary defines the tools, trailers and trades of a heavy move: rigging, gantries, skates, lowboys, sling angles, leveling instruments and Nevada's oversize-load rules. Each entry gives a one-sentence definition, then why the term matters on a move in Northern Nevada.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

All pages in this section

Rigging

Rigging is the use of slings, hardware, hoists and lifting equipment, planned for the load's weight and balance, to lift, lower, move or secure a heavy object.

Read more

Millwright

A millwright is a skilled tradesperson who installs, assembles, levels, aligns and dismantles industrial machinery.

Read more

Gantry

A gantry is a freestanding frame, usually a beam carried on two legs, that supports a hoist or lifting device over a load.

Read more

Hydraulic gantry

A hydraulic gantry is a gantry whose lifting is done by hydraulic cylinders or jacks, used to raise, lower and travel very heavy loads in slow, controlled steps.

Read more

Machinery skates

Machinery skates are low, load-rated rolling platforms, usually with steel or polyurethane rollers, placed under a machine to roll it across a floor.

Read more

Toe jack

A toe jack is a hydraulic or mechanical jack with a low-profile toe that slides under the base of a heavy machine to lift it a few inches.

Read more

Cribbing

Cribbing is a stack of timber or engineered blocks, laid in alternating layers, that supports a lifted load and spreads its weight onto the floor.

Read more

Skidding

Skidding is the practice of moving a heavy machine horizontally by sliding or rolling it on skids, rollers or skates instead of lifting it.

Read more

Lowboy trailer

A lowboy trailer is a flatbed trailer with a deck dropped close to the road between the axles, so tall and heavy machinery can be hauled within height limits.

Read more

Removable gooseneck (RGN)

A removable gooseneck, or RGN, is a lowbed trailer whose front neck detaches and lowers to the ground, forming a ramp so equipment can be driven or pulled on.

Read more

Step deck trailer

A step deck trailer is a flatbed with two levels: a short raised deck over the tractor and a longer, lower main deck behind it, which lets taller machinery stay under...

Read more

Double-drop trailer

A double-drop trailer is a flatbed with a high front deck, a deeply lowered center well and a high rear deck over the axles, built to carry tall loads under legal...

Read more

Center of gravity

The center of gravity is the single point at which the whole weight of a machine can be treated as acting, so a lift hooked directly above it hangs level and stable.

Read more

Working load limit

The working load limit (WLL) is the maximum weight a piece of rigging hardware, such as a sling, shackle or hoist, is rated to carry in normal service, set well below...

Read more

Sling angle

Sling angle is the angle between a sling leg and the horizontal plane of the load; the lower the angle, the greater the tension in each leg for the same weight.

Read more

Spreader bar

A spreader bar is a rigid beam placed between the hook and the load that holds two or more sling legs apart so they hang vertical, keeping sideways compression off...

Read more

Theodolite

A theodolite is an optical or electronic instrument on a tripod that measures horizontal and vertical angles very precisely, used in machine alignment to set lines...

Read more

Grouting

Grouting is the placement of a flowable, non-shrinking material under a machine base plate or sole plate so it bears fully on the foundation and the load spreads evenly.

Read more

Oversize load

An oversize load is a vehicle and cargo that exceeds the legal limits on height, width, length or weight for public roads and can travel only with a permit and, when...

Read more

Lockout/tagout

Lockout/tagout (LOTO) is the set of procedures that isolate a machine from every energy source, lock the isolating devices and tag them, so the machine cannot start...

Read more

Key points

  • Short definition at the top of every entry
  • Tools and gear: gantry, skates, toe jack, cribbing
  • Trailers: lowboy and removable gooseneck
  • Public sources listed on each page

Industrial Logistics Services wrote these entries for plant managers, shop owners and maintenance staff who read an estimate or a permit and want to know what the words mean. The terms are explained in plain language and tied to public rules where a rule applies, such as ASME B30, OSHA and Nevada law.

Lifting and moving terms

These entries cover how a machine is lifted, shifted and supported on the floor. Start with rigging, then see the gantry, the hydraulic gantry, machinery skates, the toe jack, cribbing and skidding.

Trades and trailers

The millwright is the trade that sets and aligns a machine once it is in place. The lowboy trailer and the removable gooseneck are the trailer types that carry tall or heavy machines on the road.

Sources (2)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

What the classes cover

FAQ

Questions we hear

All questions

Are these terms specific to ILS?

No. They are the common terms of the machinery-moving trade. Where Industrial Logistics Services publishes equipment that relates to a term, the entry says so and links to that equipment page.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.