Skidding and crating
Skidding mounts a machine on a heavy timber or steel base so it can be lifted, rolled and stored, and crating encloses it in a protective frame or box for transport. ILS provides skidding and crating services supported by up to 25,000 square feet of indoor storage and 5 acres of outside storage.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Key points
- Skidding for lifting, rolling and storing machines
- Crating for transport protection and stored equipment
- Up to 25,000 square feet of indoor storage
- 5 acres of outside storage
- Free estimates
Many machines are fine bare on a trailer. Others need more protection: a precision machine going a long way, an export shipment, or a piece of equipment that will sit in storage for months. Skidding and crating are how those jobs get done, and ILS offers both along with the moving, so the packing and the move are planned together.
Skidding
A skid is a base, usually heavy timber or steel, that a machine is bolted to. It spreads the load, gives a forklift or rigging boom a place to pick, and lets the machine be rolled on rollers or skates. Skidding is common when a machine is shipping a long way, being stored, or heading to a tight spot where it has to be pushed into position.
Crating
A crate protects a machine from impact, weather and dirt. Depending on the machine, a crate might be an open frame with a cover, or a fully enclosed box with a vapor barrier and desiccant. Moving parts such as tables and spindles are locked down or removed and packed separately.
- Open frames for rugged machines
- Enclosed crates for delicate or exposed equipment
- Moisture barriers and desiccant for long storage
- Locked or removed moving parts
- Marked lift points and center of gravity
Crating for export and long storage
Machinery going overseas, or sitting for months, is usually crated to a higher standard than one going across town, and international shipments may be subject to wood packaging rules. Ask your freight forwarder what the destination requires. Our guide to crating machinery for shipping goes through the options, and machinery storage covers what happens in the yard.
How a skid or crate job runs
The order is the same for most machines.
- Take photos and measurements of the machine
- Lock out, drain fluids and secure moving parts
- Lift the machine and place it on the skid
- Bolt or strap it to the skid
- Build the crate or frame around it
- Mark the crate with lift points, weight and orientation
Skidding for a tight path
Skids are also used to move a machine across a floor and into position. Fitted with rollers or skates, a skidded machine can be pushed through a narrow door, along an aisle or up a gentle ramp with the weight spread out. The path has to be checked for floor loading and for anything that sticks up, such as door tracks, drain covers and cable trays.
Materials and marking
Skids and crates are built from lumber or steel sized to the weight of the machine. Fasteners and bracing are chosen so the crate does not rack under a lift. Each crate is marked with its weight, its orientation and where it can be picked, which helps the next crew, whether that is ours, a carrier's or yours. Wood used for international shipments may have to meet treatment and marking rules, so ask about the destination early.
What to send for a skidding or crating estimate
Send the machine type, dimensions and weight, the destination and mode of transport, and how long it will be stored. Tell us whether you need an export-grade crate. Estimates are free.
Sources (3)
- ASME: asme.org/codes-standards/find-codes-standards/b30-1-jacks-industrial-rollers-air-casters-h (checked November 2026)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.184 (checked November 2026)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.178 (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateLicensed in Nevada
Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.
What the classes coverDo you crate machinery for shipping?
Yes. Skidding and crating are among the services ILS lists, and the crate is built to suit the machine and the trip.
Can you store the crated machine?
Yes. ILS has up to 25,000 square feet of indoor storage and 5 acres of outside storage.
Do you build crates for overseas shipping?
We can discuss the machine and the destination. Ask your freight forwarder what the destination requires, and send us the specification.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)
