Loading and unloading
Loading and unloading is the part of a move where a machine goes onto, or comes off, a truck, trailer or container. ILS does this with forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms, gantries, skates and rigging gear, at plants, docks and open yards.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Key points
- Forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms
- 300-ton hydraulic gantry system and 2-ton portable aluminum gantry
- Dock, yard and container unloading
- Machines delivered by other carriers welcome
- Free estimates
A machine's most exposed moments are the first lift and the last. Loading puts the weight on a trailer deck and decides how it will ride, and unloading puts it on the floor it will stand on. We handle both ends with equipment that matches the machine, and with the same crew whether the truck is ours or somebody else's.
Loading and unloading methods
The method follows the machine and the site. A forklift with a rigging boom handles most machines in a plant yard or at a dock. A gantry works where overhead room is limited or the floor will not carry a forklift. Skates and rollers move heavy machines horizontally, and a machine on a lowboy can roll on or off using the trailer's ramps or removable neck.
- Forklift with rigging boom, from a dock or in the yard
- Hydraulic or portable aluminum gantry
- Skates and rollers on a level path
- Trailer ramps and removable gooseneck
- Container unloading from the door end
Loading for the road
Good loading starts with the center of gravity. The machine should sit on the trailer so that its weight is distributed within the trailer's axle limits and the load does not shift in a turn or a stop. Then it is blocked and tied down with chains and straps rated for the load. We check the final height before the truck moves, since deck height plus load height must stay under the legal limit or have a permit.
Unloading at a dock, yard or customer floor
Before a machine comes off a truck, we check where it is going. A dock with a plate and a good approach works for most. A yard needs firm, level ground that will take the weight of a loaded forklift or a gantry foot. Inside, the crew needs to know what floor capacity, door height and turning room they have. If the machine is going straight to its pad, we can skate it directly in and set it.
Machines shipped by other carriers
Equipment that arrives on someone else's truck still needs a lift. We unload machines delivered by other carriers and set them in place. Send us the bill of lading, so we know the weight and how the machine sits on the truck, and tell us the delivery window so we can match the site.
Safety around lifted loads
Loads are moved with a clear zone around them, and people stay out from under suspended weight. Forklift operators are trained and evaluated under 29 CFR 1910.178, and rigging is inspected before use. Our team has the right equipment, experience, protective gear and safety training, and we ask that plant staff stay outside the marked work zone while a lift is underway.
What to send for a loading estimate
Send the machine type, weight and dimensions, the site type (dock, yard, floor level), photos of the approach, and the type of truck or trailer that will carry it. Estimates are free.
Sources (3)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.178 (checked November 2026)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.184 (checked November 2026)
- ASME: asme.org/codes-standards/find-codes-standards/b30-9-slings (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateLicensed in Nevada
Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.
What the classes coverRelated services
Can you unload a machine delivered by another trucking company?
Yes. Send the bill of lading and the site details, and we will plan the lift.
Do you load machines onto your own trailers?
Yes. ILS trucks and trailers handle local transportation, and the same crew rigs and loads the machine.
What if there is no dock?
A forklift with a rigging boom or a gantry can unload in a yard, provided the ground will support it. We check the ground when we look at the site.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)
