Machine measuring worksheet
Use the worksheet to record a machine's length, width, height, weight and lift points, and the doors, floors and clearances along its route. With those numbers, ILS can choose the lift, the trailer and the method for a free estimate.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Key points
- Measure length x width x height at the widest, longest and tallest points
- Find the weight on the nameplate, in the manual or from the maker
- Photograph lift points, fork pockets and anything that sticks out
- Measure doors, aisles and ceiling height along the route
- Ask us if you are unsure; estimates are free
The measurements you send do more to shape an estimate than anything else. They decide which forklift or gantry applies, which trailer carries the load and whether a permit is needed. Take a few minutes with a tape measure and your phone, and fill in the worksheet.
Step by step
- Length: the longest side, including handles, covers and anything that extends
- Width: the widest point, including side panels and operator stations
- Height: from the floor to the highest point, including lights and stacks
- Weight: look for a nameplate or serial plate on the machine; if there is none, the manual or the maker's data sheet will have it
- Lift points: note eyebolts, lugs, fork pockets and forklift slots, and photograph them
- Floor: write down what the machine sits on, and whether it is bolted down
- Route: measure door widths and heights, aisle widths, ceiling height and floor type from the machine to the dock
Why each number matters
- Length, width and height set the trailer and whether the move needs a permit; see the oversize load checker
- Weight sets the lifting gear: forklifts with rigging booms, a gantry or skates
- Lift points tell the crew where slings go
- Door and aisle sizes decide whether a machine goes through whole or has to be partly taken down
- Floor condition decides what can roll over it and what needs plates
Common mistakes
The most common errors are measuring only the machine body and missing a tall stack or light, using a weight from an older model, and forgetting the pallet or skid under the machine. If a machine will travel on a skid or crate, measure that as well. Also look up: sprinkler lines, ducts and lights often limit the height more than a door does.
Our guide on how to measure a machine for a moving estimate goes into more detail.
What to do with the worksheet
Send us the numbers and the photos with a request for a free estimate. Partial information is fine; we will ask for what else we need. A site visit can follow where the move is complex.
Sources (3)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1926/1926.251 (checked November 2026)
- Nevada Legislature: leg.state.nv.us/nrs/nrs-484d.html (checked November 2026)
- ASME: asme.org/codes-standards/find-codes-standards/b30-9-slings (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateLicensed in Nevada
Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.
What the classes coverWhat if I do not know the weight?
Send the make and model from the nameplate and a photo. If there is no nameplate, we can help work out the weight from the size and type, then confirm it before a lift.
Do I need to measure everything?
Measure what you can. Machine size, weight and photos are the most important.
Is the worksheet only for large machines?
No. It works for any machine, large or small.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)
