3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Forklifts with rigging booms, 3,000 lbs. to 100,000 lbs.

ILS operates forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms, so one fleet can lift, carry and set loads from a light bench machine up to heavy industrial equipment. The boom turns a forklift into a tool that can pick a load from above with slings, which is how most machinery is handled when there is no overhead crane.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Key points

  • Published range: forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms
  • Boom picks let a forklift lift loads that have no fork pockets
  • Used for loading, unloading, setting and moving machinery inside and outside buildings
  • Operators are trained and evaluated under the OSHA powered industrial truck rule
  • Free estimates once we know the machine's weight and where it sits

Most plants do not have a bridge crane over every machine. A forklift with a rigging boom fills that gap: the operator drives to the load, hangs it from the boom with slings or chain, lifts it clear and moves it to the truck, the skid or its new spot. This page explains what that equipment does, when it is the right choice and what we need to know before we bring it.

What a rigging boom adds to a forklift

A plain forklift carries a load on forks. Many machines have no fork pockets, sit on legs, or are too tall or too long to balance on forks. A rigging boom, sometimes called a hoisting or lifting boom, mounts on the carriage in place of the forks and gives the operator a hook to hang slings from. The load then hangs below the boom instead of resting on steel tines.

That change matters for two reasons. First, the lift point can be placed directly over the machine's own lifting lugs or eye bolts. Second, a hanging load can be set down more gently and positioned more precisely than a load balanced on forks.

Where ILS uses them

  • Loading and unloading machinery on and off trailers
  • Setting a machine onto its pads or foundation after it is moved inside
  • Picking from the side of a trailer or dock where other lifting gear cannot reach
  • Moving equipment along an aisle, through a bay door or across a yard
  • Standing up, tipping or turning loads together with slings and a spreader bar

The same crew that drives the forklift also rigs the load, so the person lifting knows how the slings were set. If a lift needs more headroom or a steadier platform than a forklift offers, we look at the 300-ton hydraulic gantry system or the 2-ton portable aluminum gantry instead.

Capacity is more than a number on the machine

The published range is 3,000 lbs. to 100,000 lbs. with rigging booms. The usable capacity on any one lift depends on the boom, its reach, the ground and the weight of the load, because a hanging load moves the center of gravity forward. OSHA requires the rated capacity on the truck's data plate and requires that changes to the truck, such as an attachment, be reflected on that plate (29 CFR 1910.178).

That is why we ask for the real weight and the real lift points before we choose a machine. For a heavy lift the forklift is picked to suit the load, not the other way round, and ILS has the capacity of moving and relocating equipment weighing up to 300 tons using the full range of its equipment.

Training and ground conditions

Federal rules require that powered industrial truck operators be trained and that their performance be evaluated at least every three years (29 CFR 1910.178(l)). Our team has the right equipment, experience, protective gear and safety training for the work.

Ground matters as much as the machine. A loaded forklift concentrates weight on a small footprint, so we check floor slabs, trench covers, soft ground and slopes along the route before a heavy lift. In a plant that may mean steel plates or timber to spread the load; outdoors it may mean choosing a firmer path.

What to send us

  1. Machine type, overall length, width and height
  2. Weight from the nameplate or the manual
  3. Photos of where the machine sits now, including the floor and overhead
  4. Where it needs to go, with door and aisle widths
  5. Any lift points marked on the machine

With that we can tell you which forklift and boom, or which other tool, suits the lift. Estimates are free.

Sources (3)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

What the classes cover

FAQ

Questions we hear

All questions

How heavy a load can the forklifts lift?

ILS publishes forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms. The safe capacity for a given lift depends on the boom, the reach and the ground, so we confirm it from your machine's weight and lift points.

Can you lift a machine that has no fork pockets?

Often yes. A rigging boom lets us hang the machine from slings attached to its lifting lugs or to a rated sling set under it, instead of forking it.

Do your forklifts work outdoors?

Yes. We load and unload trucks and trailers in yards as well as inside buildings, with attention to the ground under the wheels.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.