3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Industrial rigging

Rigging is how a heavy machine is lifted, lowered, skidded or turned safely when it cannot simply be driven or forked. ILS rigs equipment inside and outside plants across Northern Nevada with forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms, gantries, slings and hoists.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Key points

  • Forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms
  • 300-ton hydraulic gantry system and a 2-ton portable aluminum gantry
  • Slings, hoists and rigging gear inspected before use
  • Licensed in Nevada for rigging (C-14I) and machinery installation (C-33)
  • Free estimates from the machine's size, weight and route

Industrial Logistics Services holds Nevada contractor license 0083125 in the C-14I Rigging and Cranes and C-14J Conveyance of Goods classifications, alongside its C-33 Installing Industrial Machinery license. We are experts in unique rigging for heavy equipment, and the same crew that rigs a machine out of your building can haul it and set it at the other end.

What rigging covers

Most machinery moves start with rigging: raising a machine off its pads, getting skates or a forklift under it, lifting it with a boom or gantry where a fork cannot reach, and lowering it onto a trailer or a new foundation. Rigging also covers turning, tipping and standing up tall loads, such as tanks and silos, and lowering equipment through openings.

  • Lifting with forklift rigging booms
  • Hydraulic gantry lifts where headroom or floor loading rules out a forklift
  • Skidding on machinery skates and rollers
  • Tipping, turning and uprighting tall loads
  • Loading and unloading trucks, trailers and containers

How a rigging job is planned

Every lift starts with the load: its weight, its center of gravity and where it can be picked. The nameplate, the manual or a bill of lading usually gives the weight; the manufacturer's lifting points or fork pockets show where to hold it. Then the route: floor capacity, door sizes, overhead clearance and anything in the way.

  1. Confirm weight, dimensions and lift points
  2. Walk the route and measure doors, aisles and overhead
  3. Choose the method: forklift and boom, gantry, skates or a combination
  4. Pick slings and hardware rated for the load and the sling angles
  5. Disconnect and lock out with the plant's own team
  6. Lift, move, set and level

Rigging gear and inspection

Federal rules require rigging equipment to be inspected before use and slings to carry their rated capacity, and damaged slings come out of service (29 CFR 1910.184 in general industry, 1926.251 in construction). The ASME B30 standards cover slings, rigging hardware and gantries. Our team has the right equipment, experience, protective gear and safety training. See our guide to rigging gear and inspection for what a good inspection looks at.

Rigging inside an operating plant

Plants rarely stop for a move. We plan around production areas, keep the work zone clear and coordinate the disconnect and reconnect with your maintenance staff or contractors. If the machine needs to be installed and leveled after the lift, our millwright and precision alignment work picks up where the rigging leaves off.

Rigging tall loads: tanks and silos

A tall, narrow load brings its own problems. Its center of gravity sits high, so tipping it onto a trailer or standing it back up has to be a controlled, planned rotation instead of a quick pick. The plan names the pick points, the rigging that will carry the load through the turn, and the clear space needed around it while it swings.

Tell us the diameter, the height and whether the vessel has lugs, nozzles or legs. We take it from there. See tanks and silos for more.

What to send for a rigging estimate

Send the machine type, weight and overall dimensions, photos of the machine and the space around it, the doorway or opening it must pass through, and the floor type underneath. Mention any known lift points. Estimates are free.

Sources (3)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

What the classes cover

FAQ

Industrial rigging: questions

All questions

How heavy a machine can ILS rig?

ILS has the capacity of moving and relocating equipment weighing up to 300 tons, and its published equipment includes a 300-ton hydraulic gantry system and forklifts to 100,000 lbs. with rigging booms. The method for your machine comes out of the estimate.

Do you rig small loads too?

Yes. A 2-ton portable aluminum gantry handles light lifts in tight spots, and single machines are welcome. Estimates are free.

Can you lower a machine through a roof or wall opening?

Whether it can be done depends on the opening, the structure and the load, so we look at the site before saying yes. Send photos and measurements and we will tell you what we see.

What is the difference between a machinery mover, a rigger and a millwright?

A machinery mover gets the machine from one place to another, including the haul; a rigger lifts, lowers, skids and turns it; a millwright sets, levels and aligns it. ILS does all three and holds the Nevada C-14I Rigging and Cranes and C-33 Installing Industrial Machinery classifications.

Can ILS move a machine onto a mezzanine or upper floor?

The method depends on the floor's capacity and the opening: a forklift with a rigging boom, a gantry, or a lift through an opening. Send photos of the opening and the floor with the machine's weight for a free estimate.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.