2-ton portable aluminum gantry
ILS lists a 2-ton portable aluminum gantry for light lifts in places where a forklift will not fit. Its aluminum frame is light enough to carry in and assemble on the spot, which suits small machines, lab equipment and rooms with low or narrow access.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Key points
- Published equipment: 2-ton portable aluminum gantry
- Light enough to carry into rooms a forklift cannot enter
- Works for lifts, short moves and loading onto a cart or skid
- Sits on the floor, so floor condition still matters
- Matches the right tool to the load: this gantry, a larger gantry, or a forklift
Not every lift is a big one. Small CNC machines, bench equipment, instruments, motors and gearboxes still need to be lifted safely, and the room they sit in often has no crane and no space for a forklift. A portable aluminum gantry gives a clean overhead lift point exactly where one is needed, then comes apart and leaves with the crew.
What it is
A portable gantry is a freestanding frame of two uprights and a beam, with a hoist or trolley that travels along the beam. Aluminum makes the parts light, so a small crew can carry them through a door and assemble the frame around the machine. The published rating for ILS's unit is 2 tons.
Because it is light, it is also quick to set up and take down, and it does not need the clearance a mobile lift or a forklift needs to maneuver. That makes it a practical choice inside offices, labs, clean areas and shops with tight aisles.
Good uses
- Lifting a small machine onto or off a skid or cart
- Removing and replacing a motor, gearbox or pump
- Lowering equipment onto machinery skates for a short move
- Handling equipment in rooms with a low ceiling
- Loading and unloading in a space where a forklift would damage floors or finishes
Know the limit
Two tons is the published limit, and the weight of the load plus any slings, spreader or hoist hardware must stay within it. A load that looks small can be heavy: machine tools are dense. Always use the nameplate weight or a scale reading instead of a guess. If the weight is near or above the limit, we step up to a forklift with a rigging boom or the 300-ton hydraulic gantry system.
Federal rules for slings and rigging gear (29 CFR 1910.184 in general industry and 1926.251 in construction) apply no matter how small the lift is: slings are inspected before use, kept within their rated capacity and removed from service when damaged.
Floors and finishes
A gantry puts its weight on four small feet. On a polished or epoxy floor we use pads or plates to protect the finish and spread the load. On a raised floor or a floor over a basement, we confirm what the floor can carry before anything is lifted. If you have a restriction, such as a clean room procedure, tell us before the visit.
Sources (3)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.184 (checked November 2026)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1926/1926.251 (checked November 2026)
- ASME: asme.org/codes-standards/find-codes-standards/b30-1-jacks-industrial-rollers-air-casters-h (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateLicensed in Nevada
Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.
What the classes coverWhat can the portable gantry lift?
ILS lists a 2-ton portable aluminum gantry. The load, slings and hoist hardware together must stay within that rating.
Can it be used where a forklift cannot go?
Yes. It breaks down into pieces small enough to carry through standard doors, which is the main reason to choose it.
Does ILS move small machines or large ones?
Both. Single machines are welcome, estimates are free, and the right equipment is matched to the weight.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)
