Industrial furnace and oven moving
A furnace or industrial oven is moved by cooling it fully, taking out the fragile refractory and fixtures, and then lifting or dismantling the steel shell in sections. ILS dismantles, moves and reinstalls large, complex machinery systems, and carries a Nevada C-33 Installing Industrial Machinery license.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Key points
- The furnace is cold and locked out before anyone starts
- Refractory brick and ceramic fiber are fragile and are packed or replaced
- Large ovens are often dismantled into sections and reassembled
- Burners, gas trains and controls are disconnected by licensed trades
- Free estimates from nameplate data, drawings and photos
Heat treat furnaces, curing ovens, bake ovens and kilns are built as a shell, an insulation system, heating or burner assemblies and a control cabinet. The shell is rugged; the insulation and the heating parts are not. Planning a move starts with deciding what stays in place and what comes out.
Furnaces differ, and so does the move
A small box oven on a stand can be lifted whole with a forklift and a set of forks. A long conveyor oven, a heat-treat line or a walk-in oven is something else: panels, frames, ducts, blowers and conveyors, all of which are numbered and taken apart. We try to keep the machine in as few pieces as makes sense, because every cut and every joint is work on both ends.
A batch furnace with a heavy hearth is often moved whole on a gantry or heavy forklift. A kiln with brick lining is usually relined after it moves, because the brick expands, cools and shifts.
Preparing the unit
Everything starts cold. A hot furnace is not touched. After cooldown, the owner or their service technician disconnects the gas train and electrical power and locks them out (29 CFR 1910.147). Loose items such as hearth plates, racks, baskets and thermocouples are removed and packed.
- Cool completely and lock out gas and power
- Remove thermocouples, element leads and loose hearth parts
- Photograph the wiring, ducting and burner arrangement
- Mark panels and ducts with numbers before disassembly
- Cover openings so water and dust stay out
Dismantling and reinstalling
For ovens that come apart, our crew works from the manufacturer's drawings or from photos and tags taken before dismantling. Panels are strapped and crated, and fasteners are bagged and labeled by location. At the new site the frame goes down first, then the shell, ductwork, blowers and conveyor, and the unit is leveled before the burner and control trades return.
See dismantling and reinstallation for the general process. For leveling, ILS has optical levels, theodolites and spirit levels accurate to .0005" in 12".
Transport and equipment
ILS uses forklifts to 100,000 lbs. with rigging booms, a 300-ton hydraulic gantry system and a 2-ton portable aluminum gantry, and its trailers run to 50 tons. Tall or long ovens can exceed Nevada's legal 14 ft height or 102 inch width without a permit (NRS 484D), so the shipping dimensions are checked before the truck is booked.
What to send
Send the nameplate, the overall size, the weight if known, any drawings, and photos of the unit and the doors it must pass. Tell us whether the lining stays or gets replaced. Estimates are free.
Sources (4)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.147 (checked November 2026)
- ASME: asme.org/codes-standards/find-codes-standards/b30-9-slings (checked November 2026)
- Nevada Legislature: leg.state.nv.us/nrs/nrs-484d.html (checked November 2026)
- Nevada Legislature: leg.state.nv.us/nrs/nrs-624.html (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateLicensed in Nevada
Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.
What the classes coverCan a furnace be moved with the brick lining in place?
Sometimes, with careful rigging, but brick can crack in transit. Many owners plan to reline or repair the lining after the move; the manufacturer or a refractory contractor decides.
Do you reassemble a dismantled oven?
Yes. ILS dismantles and reinstalls large, complex machinery systems, and the reassembly follows the markings made at the original site.
Who reconnects the gas?
A licensed gas trade, with the timing agreed in the estimate.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)
