3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

HVAC unit and chiller moving

Large HVAC equipment is moved by recovering the refrigerant through a certified technician, disconnecting the electrical and piping, and lifting the unit at its factory lifting points onto a trailer or a new curb or pad. ILS rigs and hauls the equipment; who handles the refrigerant and controls is agreed in the estimate.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Key points

  • Refrigerant is recovered by an EPA-certified technician
  • Lift only at the factory lifting lugs or with a spreader frame
  • Rooftop lifts are planned for reach, weight and the structure underneath
  • Coils and fins are protected with cardboard or plywood
  • Free estimates from the nameplate, drawings and roof photos

Rooftop units, air handlers, air-cooled and water-cooled chillers and cooling towers are common reasons to bring in a rigging crew. They are bulky, they are often high above grade, and the casing is thin sheet metal that dents if it is lifted in the wrong place.

Large HVAC equipment is light for its size

A packaged rooftop unit can cover a good part of a trailer and still be easy to dent. Chillers are heavier and denser, with a compressor, heat exchangers and controls in a frame. Weight and dimensions come from the nameplate or the submittal. The weight with water in a chiller's barrel is higher than the shipping weight, so the unit is drained and the weight confirmed.

Because the casing is thin, lifting uses a spreader bar or a lifting frame so the slings do not crush the panels or the coil. The manufacturer's lifting diagram shows where to attach.

Refrigerant and water

Federal law under Clean Air Act Section 608 requires that refrigerant be recovered, not vented, by a certified technician before equipment is opened or taken apart. That work is done before the riggers start. Glycol or water loops are drained and capped. The unit is then locked out (29 CFR 1910.147) and the electrical disconnected.

  • Refrigerant recovered by a certified technician
  • Water or glycol drained and capped
  • Electrical locked out and disconnected
  • Condensate drains and control wires tagged
  • Fan guards and coil guards left in place or replaced for the lift

Rooftop and tight-site lifts

Many jobs are on a roof, and some are in a yard behind a building where a truck cannot reach. The approach depends on the weight and the reach: a forklift with a rigging boom can lift to a modest height, and a gantry or a crane is used when the reach demands it. Where the reach calls for a crane, how it is arranged is agreed in the estimate.

Before any roof lift, the building owner or a structural engineer confirms the roof can carry the unit and the equipment on it.

Hauling

Rooftop units, air handlers and chillers ride on flat bed, step deck or equipment trailers. Many fit inside legal limits; taller or wider chillers may need an NDOT over-dimensional permit under NRS 484D. We check the shipping size before dispatch.

What to send

Send the nameplate, the model, dimensions, weight, a photo of the unit and its mounting, and the route to the new location. Estimates are free.

Sources (4)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

What the classes cover

FAQ

Questions we hear

All questions

Who recovers the refrigerant?

An EPA-certified technician; who arranges the technician is agreed in the estimate. The lift starts once the unit is ready.

Can you move a chiller inside a building?

Yes. Inside moves use skates, forklifts and gantries depending on the weight and floor loading.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.