3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Boiler moving and rigging

A boiler is moved by draining it, disconnecting fuel, water and flue connections as agreed in the estimate, and lifting the shell from its designed lifting points. ILS's Nevada licenses include C-33 Installing Industrial Machinery and A-14 Steel Erection and Industrial Machinery plus A-20 Industrial Piping.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Key points

  • Boilers are drained, cooled and locked out before any lift
  • Weight includes refractory and, for water-tube units, the water-side parts
  • Fuel, flue and water connections are disconnected by licensed trades
  • Many jurisdictions require an inspection after a boiler is relocated
  • Free estimates from the data plate and photos of the boiler room

Boilers are among the heaviest single pieces inside a plant, and they are built into a building: fuel train, feedwater, steam or hot water headers, flue stack and controls. Moving one is a coordinated job between the rigging crew and the boiler and piping trades.

Why a boiler needs a plan

A packaged fire-tube boiler is a steel cylinder on a frame with a burner on the front, and it can weigh from a few thousand pounds for a small hot-water unit to tens of thousands for a large steam boiler. Dry weight is on the data plate or the original manual; the figure with water is much higher, which is why the boiler is drained completely before it moves.

Boiler rooms are often tight. Doors are narrow, ceilings are low and the way out may pass the flue or a header. We measure the room and the route first and decide whether to skid the boiler out on rollers, lift it with a forklift boom or use a gantry.

Shutdown, drain and disconnect

The plant's boiler operator or service contractor shuts the unit down, lets it cool and drains it. Gas, oil, feedwater, blowdown, steam and electrical connections are isolated and locked out (29 CFR 1910.147). Gas and electrical disconnects belong to licensed trades, and ILS coordinates with them.

  • Cool down and drain, including the low points
  • Isolate and cap the fuel train
  • Disconnect feedwater, steam or hot-water headers and the blowdown line
  • Remove the flue connection and protect the burner and controls
  • Take photographs of every connection before it comes apart

Rigging, transport and setting

Boilers carry lifting lugs or are lifted from the base skids. A boom or gantry lift lets the boiler leave through a door or hatch that a forklift cannot reach. For longer hauls, a boiler goes on a single-drop or double-drop trailer, and a heavy or wide one may need an NDOT over-dimensional permit (NAC 484D). At the new location the boiler is set on its pad, leveled, and left ready for the piping trades.

ILS also holds the A-20 Industrial Piping classification (license 0083124), and ILS lists engineering services and foundations as part of a relocation project.

Inspection after the move

NRS 455C.110 directs the Division of Industrial Relations to adopt regulations on the installation, inspection, operation and relocation of boilers and pressure vessels. The National Board of Boiler and Pressure Vessel Inspectors publishes the inspection code (NBIC). The owner arranges the inspection; we ask when it is scheduled so the dates of the move and the inspection line up.

What to send

Send the data plate photo, the rating, the dry weight, overall size, and photos of the boiler room, the door and the route out. A short note on what stays and what goes with the boiler helps us write an exact estimate. Estimates are free.

Sources (5)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

What the classes cover

FAQ

Questions we hear

All questions

Does ILS handle both firetube and watertube boilers?

We rig boilers by their weight and lift points, not by type. Send the nameplate and the manual if you have it and we plan from there.

Who disconnects the gas line?

A licensed trade chosen by the owner. ILS coordinates the timing so the rigging crew arrives when the boiler is isolated and locked out.

Can a boiler be moved with a forklift?

Small units often can. Large ones use a forklift with a rigging boom or a 300-ton hydraulic gantry system, depending on weight and the room.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.