Moving stone and granite equipment
Stone-shop equipment is moved by draining water, securing the bridge and head, rigging each machine from its frame and protecting it from slab dust and slurry. ILS lists Granite Processing Facilities among its industries and rigs with forklifts to 100,000 lbs. with rigging booms and a 300-ton hydraulic gantry system.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Key points
- Water systems and slurry tanks are drained before moving
- Bridge saws and CNC heads are locked in the transit position
- Slab racks and vacuum lifters are moved empty
- Machines are lifted from the frame and leveled on the new floor
- Silica dust is controlled at the shop during cleanup
- Free estimates
Countertop and slab fabrication shops use bridge saws, CNC stone machining centers, waterjets, edge polishers, slab lifters and A-frame racks. These machines are heavy, wet and abrasive. Industrial Logistics Services lists Granite Processing Facilities among the industries it works with, and the work leans on its rigging gear and trucks.
Why stone machines need care
A bridge saw runs a large blade on a rail bridge above a table, and the bridge has to stay straight and parallel. A CNC stone router has precision rails and a spindle similar to a metalworking machine, plus a lot of water. The slab tilting table and vacuum lifters have hydraulics and pumps. All of this sits in a shop where wet stone dust gets into everything.
Slab handling is a separate matter from machine moving. Heavy slabs on A-frame racks are moved by the shop or a stone supplier, and the machines are cleaned and emptied beforehand.
Preparing stone machinery
Besides locking out power (29 CFR 1910.147), a stone shop has to deal with water and dust. Cutting and polishing stone produces respirable crystalline silica, which OSHA regulates at 29 CFR 1910.1053. Cleaning a machine with wet methods rather than dry sweeping or compressed air is how shops keep that dust down.
- Lock out and disconnect power, water and air
- Drain tanks, pumps and sumps, and clean out slurry
- Remove the blade, polishing pads and bits
- Lock the bridge, carriage and head and tie down any loose tables
- Cap hydraulic and vacuum lines and label hoses
- Photograph the machine and its water connections
Rigging and hauling
Most stone machines go on forklifts with rigging booms, skates or a hydraulic gantry if the frame is too heavy to fork. The 300-ton hydraulic gantry system and forklifts to 100,000 lbs. with rigging booms are on the published list. On the road the machines ride on a lowboy or flatbed, chained down and padded. Check the machinery transport page.
The sharp edges of a blade guard or a steel table can cut a sling, so slings are protected and inspected before use under 29 CFR 1910.184.
Setting up the new shop
A stone shop needs a floor that handles water, a drain or sump for the slurry, and enough floor strength for machines that weigh several tons. ILS can help with engineering services and foundations for relocations. Machines are set, leveled with optical or laser levels and connected to water by the shop's plumber.
Estimate checklist
Send the machine list, maker and model, weights if known, photos and the exit path. Estimates are free.
Sources (3)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.1053 (checked November 2026)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.147 (checked November 2026)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.184 (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateLicensed in Nevada
Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.
What the classes coverDo you move slabs?
This page covers shop machinery. Tell us if slabs are part of the job and we will discuss what makes sense.
Do the water tanks have to be empty?
Yes, water adds weight and spills, so tanks and pumps are drained and the slurry is cleaned out.
Can you move a CNC stone router?
Yes. It is moved like other CNC machines, with the gantry locked and the table supported.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)
