3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Precision leveling and alignment

Precision leveling and alignment bring a machine's bed, axes and drives into the geometry the manufacturer specifies, so it cuts, presses or prints accurately. ILS uses optical levels and theodolites (1 arc second), high accuracy laser levels and spirit levels accurate to .0005" in 12".

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Key points

  • Optical levels and theodolites (1 arc second)
  • High accuracy laser levels
  • Spirit levels accurate to .0005" in 12"
  • Leveling after every move, not just new installs
  • Done by the crew that set the machine

A machine that has been moved is a machine that may need checking. Even a careful move changes how a bed sits on its pads, and a new foundation never matches the old one exactly. ILS puts it in right the first time by leveling and aligning with instruments built for the job, before the machine is handed back to your operators.

Leveling versus alignment

Leveling means setting a machine so its reference surfaces are flat and plumb in relation to gravity, usually within a stated tolerance across a stated distance. Alignment is broader: it means the machine's parts are correctly positioned in relation to each other, such as a spindle square to a table, rolls parallel to each other, or a motor shaft in line with the shaft it drives.

Both matter. A machine can be level and still have misaligned parts, and a machine with aligned parts can still twist if its feet are not carrying equal load.

The instruments we use

Different jobs call for different tools. The published list of ILS precision alignment equipment is:

  • Optical levels and theodolites (1 arc second)
  • High accuracy laser levels
  • Spirit levels (accurate to .0005" in 12")

An optical level or laser gives a reference line across a long machine or a whole room. A theodolite measures angles, which helps square one part to another. A precision spirit level checks a bed or table directly. We choose by what the machine's manual asks for, not by what is on the truck.

How leveling is done

The usual order of work is below. Manufacturers differ, so the manual's procedure and tolerances come first.

  1. Check the foundation and the supports under each pad or foot
  2. Set the machine on jacking screws, wedges or leveling pads
  3. Take readings along each axis and across the bed
  4. Adjust each support and recheck, working toward the specified tolerance
  5. Anchor the machine and read again, since tightening can shift it
  6. Record final readings so your maintenance team has a baseline

When to level again

Machines settle, floors move and temperatures change, so level is not a one-time thing. Recheck after any move, after a change in the slab, after a crash or heavy impact, or when parts begin to show wear in a pattern. Our guide to how machines are leveled and aligned goes through the process in more detail.

Why a good record matters

When leveling is done, we write down the readings. Those numbers become your baseline. If the machine starts producing parts out of tolerance a year later, a maintenance technician can compare new readings against the original ones and see right away whether the machine has moved. Without that record, the only choice is to start from scratch.

What to send for an alignment estimate

Send the machine type, the manufacturer's tolerances if you have them, and whether the job is a new installation or a recheck of a machine already in place. If it is part of a move, say so and we will fold it into the same plan. Estimates are free.

Sources (3)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

What the classes cover

FAQ

Precision leveling & alignment: questions

All questions

How accurate is your leveling equipment?

Our published equipment list includes optical levels and theodolites (1 arc second) and spirit levels accurate to .0005" in 12". Tolerances for your machine come from its manufacturer.

Do you level a machine after you move it?

Yes. Leveling and alignment are part of putting a machine back to work. It is done after setting and again after anchoring.

Can you align a machine we did not move?

Yes. Send us the machine details and the tolerances and we will quote the work.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.