Hydraulic gantry
A hydraulic gantry lifts with pressurized fluid instead of a chain hoist, which lets it raise very heavy loads smoothly and hold them in place. It is the choice when a machine is too heavy or too sensitive for a fork or a hoist.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Key points
- Lifts with hydraulic cylinders
- Slow, controlled, blocked at each stroke
- Used for the heaviest machines
- ILS publishes a 300-ton hydraulic gantry system
Where a chain hoist runs out of capacity, hydraulic cylinders keep going. They raise a load in short, even strokes, and the load is blocked or cribbed at each stage.
How a lift works
- Place the legs on mats or a verified floor
- Attach the load at its lift points
- Raise one stroke and block the load
- Repeat to height, then travel or lower
- Set the load on its trailer or foundation
Why it matters on Nevada moves
Presses, large stone saws, tanks and process equipment can weigh more than any forklift on site. A hydraulic gantry also works indoors where headroom is low, which suits older shops and warehouses around Carson City and the Carson Valley.
The ILS system
ILS's equipment list names a 300-ton hydraulic gantry system, and the company states a capacity of moving and relocating equipment weighing up to 300 tons. Details are on the 300-ton hydraulic gantry system page. The hydraulic gantry sits under the same ASME B30.1 family of standards as other jacking and gantry devices.
Sources (2)
- ASME: asme.org/codes-standards/find-codes-standards/b30-1-jacks-industrial-rollers-air-casters-h (checked November 2026)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1926/1926.251 (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateDoes a heavier lift take longer?
Hydraulic lifts are deliberate by design, so the estimate looks at the whole lift sequence.
Can it work outdoors?
Yes, on a prepared surface that carries the leg loads.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)