3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Industrial rigging in Dayton, Nevada

ILS rigs machinery in Dayton under Nevada license 0083125 (C-14I Rigging and Cranes), with forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms and a 300-ton hydraulic gantry system. Dayton is 14.7 road miles from the Carson City yard by US-50, and estimates are free.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Dayton at a glance

From the Goni Road yard
14.7 milesroad distance, OpenStreetMap routing
Elevation
4,302 ftUSGS 3DEP
County
Lyon CountyUS Census Bureau
Population
15,781ACS 5-year 2024
Manufacturing establishments
9ZIP 89403, County Business Patterns 2023

Key points

  • Forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms
  • 300-ton hydraulic gantry system; 2-ton portable aluminum gantry
  • 14.7 road miles from the yard, about 34 minutes by car in free flow
  • ZIP 89403: 36 construction, 9 manufacturing establishments (CBP 2023)
  • Nevada license 0083125, C-14I Rigging and Cranes

Dayton's ZIP 89403 listed 36 construction establishments and 9 manufacturers among 177 in the 2023 County Business Patterns. For a rigger, that points to lifts in yards as well as inside shops, which changes the footing and the way a load is set.

Yard lifts and shop lifts

The general method is on our rigging page. A lift inside a shop is constrained by the ceiling, the door and the slab. A lift in a yard is constrained by the ground. Gravel, packed fill and asphalt all carry a forklift or a gantry foot differently, so we look at the ground under a lift just as closely as the load.

  • Inside: ceiling height, door width, slab thickness, trenches
  • Outside: ground bearing, slope, overhead lines, where the trailer can stand
  • Both: the weight, the center of gravity and the lift points on the machine

Matching method to load

Light loads in tight bays are the job for the 2-ton portable aluminum gantry. A mid-size machine on open ground suits a forklift with a rigging boom. A very heavy load, which can go up to 300 tons for ILS, calls for the hydraulic gantry on cribbing. For a heavy machine on a slab the plan must account for the floor's capacity, as our floor loads guide explains.

Inspection and standards

Rigging gear is inspected before use and damaged slings come out of service (29 CFR 1910.184). Forklifts are operated under 29 CFR 1910.178, and the ASME B30 standards cover slings, hardware and gantries. We bring protective gear and safety training to every lift.

Near the yard, near the crew

At 14.7 road miles, a Dayton lift is a short trip from the crew's base, and the crew that rigs the machine can haul it on an ILS trailer and set it at the other end. A lift also goes better when the plan is shared with the shop beforehand: who locks out the machine, who clears the area and where the trailer will stand.

Sources (4)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

What the classes cover

FAQ

Industrial rigging in Dayton: questions

All questions

How heavy a machine can ILS rig in Dayton?

ILS has the capacity of moving and relocating equipment weighing up to 300 tons. The method for a given machine comes from its weight and the ground or floor.

Do you rig outdoors as well as inside?

Yes. Yard lifts are planned around ground bearing, slope and overhead lines.

How far is Dayton?

14.7 road miles from 3868 Goni Rd via US-50. Car time of 34 minutes in free flow is an estimate.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.