Machinery moving in Fallon and the Lahontan Valley
ILS moves machinery in Fallon as a licensed Nevada contractor, with its own trucks, trailers to 50 tons and forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms. Fallon is 61.3 road miles east of the Carson City yard on US-50 through Dayton and Silver Springs, and estimates are free.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Fallon at a glance
- From the Goni Road yard
- 61.3 milesroad distance, OpenStreetMap routing
- Elevation
- 3,965 ftUSGS 3DEP
- County
- Churchill CountyUS Census Bureau
- Population
- 9,463ACS 5-year 2024
- Manufacturing establishments
- 17ZIP 89406, County Business Patterns 2023
Key points
- 61.3 road miles on US-50; about 82 minutes by car in free flow
- Elevation about 3,965 ft (USGS 3DEP)
- ZIP 89406: 464 establishments, 17 manufacturers, 57 construction
- 656 residents (16.8 percent) work in manufacturing
- Crew and truck go as one unit
Fallon, the Churchill County seat in the Lahontan Valley, stands at about 3,965 feet, roughly 687 feet lower than Carson City's 4,652. ZIP 89406 held 464 business establishments in 2023 and the town has 9,463 residents.
A long single-road move
The general method is on our machinery moving page. There is one main route: US-50 east. Between Silver Springs and Fallon it crosses open desert, with distance between towns and few places to pull off. For a machinery mover that means the load should be ready, the permits sorted and the crew set before the truck leaves Carson City.
Planning the day around the distance
The planning is about timing. Pickup, loading and tiedown happen first; the haul follows; then set-down in Fallon. The day is planned so the crew is not working against daylight. The move guide explains the stages.
- Confirm access and unloading space with the receiving site
- Check the machine's dimensions against Nevada limits before booking
- Decide where the machine stands overnight if the job takes more than a day
- Line up the electrician for reconnection
Fallon's numbers
Fallon's business mix is modest in manufacturing and stronger in construction and wholesale. Farm country does not appear in those counts, but processing and repair shops for an agricultural valley use machines that do.
| Measure | Fallon (ZIP 89406) | Source |
|---|---|---|
| Business establishments | 464 | CBP 2023 |
| Manufacturing establishments | 17 | CBP 2023 |
| Construction establishments | 57 | CBP 2023 |
| Wholesale establishments | 23 | CBP 2023 |
| Median home build year | 1985 | ACS 2024 5-year |
Check the floor first
Floors may be thinner or cracked, and a forklift route should be checked before a heavy machine travels across it. Our floor loads guide covers the checks.
Request an estimate
Send the machine's type, weight and size, both addresses, and photos of the doors and the floor. The estimate is free.
Machines leaving Fallon
A move can also run the other way, out of a Fallon shop to Carson City, Reno or another state. The same stages apply in reverse: disconnect and prepare at the Fallon end, rig and load, then haul west on US-50. Local transportation is on ILS trucks, and long distance goes through a network of trucking companies. If the new building is not ready, the Carson City yard can hold the machine in up to 25,000 square feet of indoor storage or 5 acres of outside storage.
Sources (3)
- U.S. Census Bureau: api.census.gov/data/2023/cbp (checked November 2026)
- U.S. Census Bureau: data.census.gov/ (checked November 2026)
- Nevada Legislature: leg.state.nv.us/nrs/nrs-484d.html (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateLicensed in Nevada
Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.
What the classes coverHow far is Fallon from ILS?
61.3 road miles on US-50, about 82 minutes by car in free flow. This is not a truck time.
Will a Fallon move need a permit?
Only if the load exceeds Nevada's legal height, width, length or weight. We check at the estimate.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)
