Machinery moving in Minden, Nevada
ILS moves machinery in Minden, from a single machine to a production line, as a licensed Nevada contractor with forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms. The yard on Goni Road is 18.8 road miles north on US-395, and estimates are free.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Minden at a glance
- From the Goni Road yard
- 18.8 milesroad distance, OpenStreetMap routing
- Elevation
- 4,709 ftUSGS 3DEP
- County
- Douglas CountyUS Census Bureau
- Population
- 3,707ACS 5-year 2024
- Manufacturing establishments
- 44ZIP 89423, County Business Patterns 2023
Key points
- 18.8 road miles via US-395, about 26 minutes by car in free flow (a free-flow estimate, not a truck time)
- ZIP 89423: 457 establishments, 44 in manufacturing, 65 in construction (CBP 2023)
- Elevation about 4,709 ft, 57 ft above Carson City
- Own trucks for the haul and our own crew for the move at both ends
- Free estimates for one machine or a full line
Minden is small by population, 3,707 residents in the 2024 five-year Census estimates, but ZIP 89423 held 457 business establishments in 2023, 44 of them manufacturers.
Why a Minden move is mostly about the shop, not the road
The general method is on our machinery moving page. The highway south is the easy part. US-395 drops past Indian Hills into the Carson Valley and the final approach to Minden is flat. The work that decides a Minden job is inside the building: how the machine is disconnected, how it gets through the door, and what it sits on when it arrives.
With 44 manufacturing establishments in one ZIP code (Census County Business Patterns 2023), Minden has more of them than Carson City's central ZIP 89701, which counted 29. The Census does not publish employment at ZIP level, so the figure shows how many businesses there are, not how big they are.
A typical sequence for a Minden move
Each step is the standard one. The Minden specifics are one straight route and the same crew handles load-out and set-down.
- Send the machine type, weight and photos of the door, floor and route
- We confirm the lift points and choose the method: forklift with rigging boom or gantry
- The machine is locked out under the plant's own program and the utilities disconnected as agreed in the estimate; see the lockout/tagout guide
- We rig the machine, load it and tie it down on the trailer
- The truck runs the 18.8 miles on US-395 and the crew sets the machine at the new pad
- Level, reconnect and run start-up checks with your team
What the ZIP 89423 numbers say
Construction is the biggest industrial-type group in the ZIP at 65 establishments, ahead of wholesale at 25. Warehousing shows no count, which in County Business Patterns means fewer than three or none. 105 Minden residents work in manufacturing (6.0 percent of those employed), a count of where people live, and the median home dates from 1995.
| Measure | Minden (ZIP 89423) | Source |
|---|---|---|
| Business establishments | 457 | CBP 2023 |
| Manufacturing establishments | 44 | CBP 2023 |
| Construction establishments | 65 | CBP 2023 |
| Wholesale establishments | 25 | CBP 2023 |
| Population | 3,707 | ACS 2024 5-year |
Equipment we bring to the job
Rigging uses forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms. Where the floor or headroom rules out a forklift we have a 2-ton portable aluminum gantry and a 300-ton hydraulic gantry system. Equipment trailers run to 50 tons. Nevada requires a permit above 14 feet in height (NRS 484D.605) or 102 inches in width (NRS 484D.685), and the oversize load checker shows where your load sits.
When Minden is one stop on a longer job
Because the yard is 18.8 miles away, a machine can come to Goni Road for interim storage and go out again later. We have up to 25,000 square feet of indoor storage and 5 acres of outside storage there. For the whole sequence from first call to final leveling, see how a machinery move works.
Sources (3)
- U.S. Census Bureau: api.census.gov/data/2023/cbp (checked November 2026)
- U.S. Census Bureau: data.census.gov/ (checked November 2026)
- Nevada Legislature: leg.state.nv.us/nrs/nrs-484d.html (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateLicensed in Nevada
Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.
What the classes coverHow far is Minden from the ILS yard?
18.8 road miles via US-395 south through Indian Hills, about 26 minutes by car in free flow. That is a planning figure from a car routing model, not a promise for a loaded truck.
Does a Minden move need a permit?
Only if the load on the trailer exceeds Nevada's legal height, width, length or weight. Over 14 feet high or 102 inches wide needs an NDOT permit. We check the dimensions at the estimate.
Is the estimate free?
Yes. Send the machine's size and weight and a few photos, and we work out the method and trailer from there.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)
