3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Nevada legal load limits and permit triggers

A load in Nevada can travel without an over-dimensional permit up to 14 feet high, 70 feet long as a combination, and 102 inches wide, within the federal 80,000-pound gross weight limit. Go past any of those, and NDOT must issue a permit, with pilot cars required at larger sizes.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Key points

  • Height: 14 feet (NRS 484D.605)
  • Combination length: 70 feet (NRS 484D.615)
  • Width: 102 inches without a permit (NRS 484D.685)
  • Weight above 80,000 pounds gross needs an over-dimensional permit
  • Pilot car thresholds are in NAC 484D.670; NDOT decides each permit

Machinery often rides a trailer that makes the load taller or wider than a regular truck. This page sets out the numbers that decide whether a move needs a permit, as they appear in Nevada's statutes and administrative code. It is a reference, not legal advice, and the Nevada Department of Transportation (NDOT) decides every permit. The numbers below were checked against the sources listed at the bottom of the page.

These are the sizes at which a vehicle and load may travel on Nevada highways without a permit.

The legal limits
MeasureLimit without a permitRule
Height14 feetNRS 484D.605
Combination length70 feetNRS 484D.615
Width102 inchesNRS 484D.685
Gross weight80,000 pounds (federal limit)23 CFR 658.17
Length including overhang75 feetNAC 484D.650
Overhang10 feetNAC 484D.650
Axle weightsThe NRS 484D.635 formulaNAC 484D.650

Source: Nevada Revised Statutes chapter 484D; 23 CFR 658.17. NDOT's Over Dimensional Vehicle Permits office issues the permits.

What a permit covers

A load that exceeds any of the limits above needs an over-dimensional permit. Nevada issues single-trip permits (NAC 484D.655) and annual multiple-trip permits (NAC 484D.660). The application must describe the vehicle, the load and the exact highways to be used (NRS 484D.730).

The load must also be non-reducible (NAC 484D.650). That means it cannot be made smaller by reasonable disassembly or rearranging. A machine that can be turned, tilted or have a removable part taken off to fit within the limits is generally expected to be, which is why the plan for a move looks at that first.

Pilot cars

NAC 484D.670 sets when a load needs escort vehicles. As summarized from the code, a lead car is called for when a load is over 15 feet 6 inches high (with a clearance pole), over 12 feet wide on a two- or three-lane highway or in darkness or holiday hours, over 16 feet wide, or has a front overhang over 25 feet. A rear car is called for when a load is over 14 feet wide, over 12 feet wide in darkness or holiday hours, has a rear overhang over 25 feet, or is over 110 feet long. The code text controls; confirm with NDOT before relying on this summary.

Pilot cars
EscortTriggers (summary of NAC 484D.670)
Lead carOver 15 ft 6 in high with a clearance pole; over 12 ft wide on a 2- or 3-lane highway or in darkness/holiday hours; over 16 ft wide; front overhang over 25 ft
Rear carOver 14 ft wide; over 12 ft wide in darkness/holiday hours; rear overhang over 25 ft; over 110 ft long (120 ft with a mechanically steered rear axle)

Moves that cross into California

An oversize load that crosses the state line needs a Caltrans transportation permit in addition to the NDOT permit. Caltrans issues its own permits and sets its own routes. For the full picture see our guide on moving machinery from Nevada into California.

Where ILS fits in

Industrial Logistics Services is a for-hire motor carrier of property (USDOT 642556, MC-531191) and hauls on equipment trailers to 50 tons. When a machine will go over a limit, the permit and any escorts become part of the plan and the estimate. You can try the numbers for your own machine in the Nevada oversize load checker, which is a planning guide, not a permit.

Sources (4)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

Licensed in Nevada

Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.

What the classes cover

FAQ

Questions we hear

All questions

How wide can a load be in Nevada without a permit?

102 inches, under NRS 484D.685. A wider load needs an NDOT over-dimensional permit.

How tall can a load be in Nevada?

14 feet, under NRS 484D.605. Taller loads need a permit and a route that clears bridges and wires.

Who issues the permit?

The Nevada Department of Transportation, through its Over Dimensional Vehicle Permits office. A site like this one cannot issue or approve a permit.

Do these limits change?

Statutes and codes are amended. Check the current text of NRS 484D and NAC 484D, or ask NDOT, before a move.

What is the legal weight limit for a truck in Nevada without a permit?

80,000 lbs. gross vehicle weight on the federal system (23 CFR 658.17), plus axle-weight limits; anything heavier needs an over-dimensional permit.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.