Millwright
A millwright is the tradesperson who sets a machine in its final position and makes it run true. Where riggers get the machine to the spot, the millwright anchors, levels and aligns it.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Key points
- Millwrights install, level and align machines
- Rigging brings the machine; millwright work seats it
- Alignment uses optical and laser instruments
- In Nevada, permanent installation is contractor work under NAC 624
The name comes from mill builders who set up water-driven mills. Today the trade covers everything from conveyors and presses to production lines, and it overlaps with rigging because a machine often cannot be installed until it is lifted into place.
Typical millwright work
- Setting a machine on its foundation or pads
- Anchoring and shimming
- Leveling with spirit levels, optical levels and lasers
- Aligning shafts, drives and conveyors
- Dismantling and reassembling a machine for a move
Millwright work and Nevada law
Nevada treats the installation of industrial machinery that is permanently attached to a structure as contractor work, covered by chapter 624 of the Nevada Revised Statutes and the C-33 classification in the administrative code. A hauler without that license is not set up to contract for the installation.
ILS and the term
ILS holds license 0046276 in the C-33 Installing Industrial Machinery classification. Its published alignment tools are optical levels and theodolites (1 arc second), high accuracy laser levels, and spirit levels (accurate to .0005" in 12"). The millwright services page lists what that work includes.
Sources (3)
- Nevada Legislature: leg.state.nv.us/nac/nac-624.html (checked November 2026)
- Nevada Legislature: leg.state.nv.us/nrs/nrs-624.html (checked November 2026)
- ASME: asme.org/codes-standards/find-codes-standards/b30-9-slings (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateIs a millwright the same as a rigger?
The trades overlap, but a rigger focuses on lifting and moving, while a millwright focuses on installing, leveling and aligning.
Can one company do both?
Yes. A single crew can rig a machine out of one building and set it in the next.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)