3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Rigging

Rigging is the gear and the planning that attach a heavy load to a lifting device so it can be raised, moved and set without damage or injury. On a machinery move it starts before any lifting, with the load's weight, balance and lift points.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Key points

  • Rigging is gear plus planning
  • Weight and lift points come first
  • Slings and hardware carry rated limits
  • ILS holds Nevada license 0083125 in C-14I Rigging and Cranes

Anyone can pick a chain up off a shelf, but rigging is the judgment around it: which sling, at what angle, hooked to which point on the machine. The word covers both the physical gear and the work of using it.

What rigging includes

Rigging covers slings, shackles, hooks, chains, hoists, spreader beams and the lifting points on the machine itself. It also covers the plan: the route, the floor, the clearances and the order of steps.

  • Choosing slings and hardware rated for the load
  • Finding the manufacturer's lifting points
  • Setting the sling angles
  • Lifting, traveling and setting the load

Why it matters in Northern Nevada

Plants here range from beverage and food lines to machine shops and stone yards, and most machines arrive on a trailer and leave the same way. Rigging is the step between truck and floor, and the step that decides whether a doorway or an overhead pipe is a problem.

How ILS relates to the term

ILS's published rigging equipment includes forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms, a 2-ton portable aluminum gantry, a 300-ton hydraulic gantry system, and a large inventory of rigging, slings and hoists. The C-14I classification is named Rigging and Cranes by the Nevada State Contractors Board. See the full industrial rigging page.

Sources (3)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

FAQ

Questions we hear

All questions

Is rigging the same as moving?

No. Moving is the whole trip. Rigging is the lifting and securing part inside it.

Who inspects rigging gear?

Federal rules require inspection before use, and damaged slings come out of service (29 CFR 1910.184 and 1926.251).

What is the difference between a machinery mover, a rigger and a millwright?

A machinery mover gets the machine from one place to another, including the haul; a rigger lifts, lowers, skids and turns it; a millwright sets, levels and aligns it. ILS does all three and holds the Nevada C-14I Rigging and Cranes and C-33 Installing Industrial Machinery classifications.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.