Removable gooseneck (RGN)
A removable gooseneck trailer lets the front section drop away, so a machine can roll straight onto the deck from the ground. It is the standard answer for equipment that cannot be lifted on.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Key points
- Neck detaches to form a ramp
- Good for drivable and winched loads
- Low deck helps with height
- ILS publishes removable gooseneck and beaver trailers to 50 tons
With the neck down, the deck becomes a ramp. Self-propelled equipment drives on. Non-drivable machines are winched or pushed onto skids and pulled up.
How loading works
- Back the trailer into place and level it
- Disconnect and lower the neck
- Move the machine onto the deck
- Raise the neck and reconnect
- Chain and tie down the machine
Rules for the road
Once loaded, the rig is a combination vehicle under NRS 484D. A load that exceeds the 14 ft height or 102 in width needs a single-trip or annual permit from NDOT, and tie-down rules apply. Loads stay non-reducible under NAC 484D.650 to be permitted.
ILS and the RGN
ILS's equipment page lists removable gooseneck and beaver trailers to 50 tons beside single-drop and double-drop trailers. Read about a lowboy trailer for the deck design and the machinery transport service for how loads are hauled.
Sources (3)
- Nevada Legislature: leg.state.nv.us/nrs/nrs-484d.html (checked November 2026)
- Nevada Legislature: leg.state.nv.us/nac/nac-484D.html (checked November 2026)
- FMCSA SAFER: safer.fmcsa.dot.gov (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateWhat is a beaver trailer?
A trailer whose rear deck slopes down (a 'beaver tail') so equipment can be loaded with ramps. ILS lists beaver trailers alongside removable goosenecks.
Can a machine be fork-loaded onto an RGN?
Yes, when that suits the machine. The method follows the lift plan.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)