3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Theodolite

A theodolite is a surveying instrument that reads angles. In a machine shop it sets reference lines so equipment can be aligned to each other and to the building.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Key points

  • Measures horizontal and vertical angles
  • Mounted on a tripod, leveled before use
  • Sets reference lines for machinery alignment
  • ILS lists optical levels and theodolites (1 arc second)
  • Often used together with laser and spirit levels

A telescope sits on a base that rotates and tilts, and graduated circles show how far it has turned. Point it at a target and the angle is known to a fraction of a degree. That one capability, repeated, lets a crew place machine parts in a straight line or at a right angle.

How it is used on machinery

After a machine is set, it is leveled and brought into line with its neighbors, with a conveyor, or with a shaft that has to turn true. Using the theodolite, the installer sets up a reference line along the floor or between points, then shifts the machine until its datum faces fall on that line. Square and plumb are checked the same way.

  1. Set up and level the instrument on a stable tripod
  2. Establish reference points on the floor or walls
  3. Sight targets on the machine
  4. Shim and adjust until readings match the drawing
  5. Recheck after the anchors are tightened

What one arc second means

An arc second is 1/3,600 of a degree. At 100 feet, one arc second is about 0.006 of an inch (six thousandths) of sideways offset, which shows why the instrument suits precision work. Real accuracy also depends on setup, temperature and the technician.

Instruments ILS publishes

ILS lists optical levels and theodolites (1 arc second), high accuracy laser levels, and spirit levels (accurate to .0005" in 12"). These support the C-33 Installing Industrial Machinery work the company is licensed for. See precision leveling and alignment for how the pieces fit.

Sources (2)

Send the machine details

Type, size, weight, where it is and where it is going. Photos help. Estimates are free.

Start the estimate

FAQ

Questions we hear

All questions

Is a theodolite the same as a transit?

Close. A transit is an older, simpler type of theodolite. Modern units read angles optically or electronically.

Do all machine installs need one?

No. Many machines need only a level. Theodolites matter when long lines, squareness or several machines must agree.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.