Machinery moving at the Tahoe-Reno Industrial Center
ILS moves machinery at the Tahoe-Reno Industrial Center as a licensed Nevada contractor, with its own trucks, trailers to 50 tons and the capacity of moving and relocating equipment weighing up to 300 tons. The center is 48.4 road miles from the Carson City yard, and estimates are free.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Tahoe-Reno Industrial Center at a glance
- From the Goni Road yard
- 48.4 milesroad distance, OpenStreetMap routing
- Elevation
- 4,692 ftUSGS 3DEP
- County
- Storey CountyUS Census Bureau
- Manufacturing establishments
- 10ZIP 89437, County Business Patterns 2023
Key points
- 48.4 road miles from 3868 Goni Rd; about 68 minutes by car in free flow, not a truck time
- Two approaches: US-50 and USA Parkway (NV-439), or I-580 and I-80 to Exit 32
- ZIP 89437: 38 establishments, 10 manufacturing, 7 warehousing, 5 wholesale (CBP 2023)
- Elevation about 4,692 ft, close to Carson City's 4,652 ft (USGS)
- Moves inside a building, between buildings, or in from outside the park
The center is an industrial park in Storey County on USA Parkway, with no residents to count, so the Census Bureau's County Business Patterns for ZIP 89437 tells the story. In 2023 it listed 38 establishments, and 10 of them were manufacturers.
What a long approach changes
The general method is on our machinery moving page. Most of the planning on a move at the park happens before the crew leaves Carson City. With 48.4 road miles between the yard and the gate, the crew cannot go back for a forgotten sling or a missing shim, so the estimate settles the equipment list first: which forklift with a rigging boom, which trailer, which skates and cribbing.
The details we ask for are the ones that fix that list. They are the machine's weight and footprint, how it sits on the floor, the dock or door it leaves through, and the path to the trailer.
- Weight and dimensions from the nameplate or manual
- Photos of the machine, its anchors and the floor around it
- Dock height, door width and overhead clearance
- Where the trailer can stand while the machine is loaded
Moves inside the park
A move within a business park falls into one of two kinds. One is a machine shifted inside a building to make room for a new line. The other is a machine sent from one building to another in the same park.
Both are short in miles and long in coordination. The plant's maintenance staff locks out and disconnects the machine under its own program (29 CFR 1910.147), ILS rigs and moves it, and the utilities go back on after the machine is set. Our page on disconnect and reconnect coordination lays out who does what.
The Census picture of the park
County Business Patterns counts establishments, not employees. For ZIP 89437 the 2023 table is short, which is itself useful: this is a place of a few dozen sites, and the mix leans toward making and storing things.
| Measure | ZIP 89437 | Source |
|---|---|---|
| All establishments | 38 | CBP 2023 |
| Manufacturing | 10 | CBP 2023 |
| Warehousing | 7 | CBP 2023 |
| Wholesale | 5 | CBP 2023 |
| Construction | 0 reported | CBP 2023 |
The Census Bureau suppresses small counts, so a zero can mean fewer than three.
Choosing the way in
The shorter approach for most loads is US-50 east to Silver Springs, then USA Parkway north. The other is I-580 and I-80 east to Exit 32. A permit for an over-dimensional load names the route it allows (NRS 484D.730), so the route is chosen when the permit is requested, not on the morning of the move. Our Nevada oversize permits guide covers the limits.
Sources (3)
- U.S. Census Bureau: census.gov/programs-surveys/cbp.html (checked November 2026)
- Nevada Legislature: leg.state.nv.us/nrs/nrs-484d.html (checked November 2026)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.147 (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateLicensed in Nevada
Nevada State Contractors Board licenses 0046276 (C-33 Installing Industrial Machinery), 0083124 (A-14, A-20) and 0083125 (C-14I Rigging and Cranes, C-14J Conveyance of Goods). USDOT 642556, MC-531191.
What the classes coverRelated
- Machinery moving
- Tahoe-Reno Industrial Center, NV
- Industrial rigging in Tahoe-Reno Industrial Center
- Millwright services in Tahoe-Reno Industrial Center
- Machinery transport in Tahoe-Reno Industrial Center
- Plant & factory relocation in Tahoe-Reno Industrial Center
- Machinery moving
- Tahoe-Reno Industrial Center, NV
- Plant & factory relocation in Tahoe-Reno Industrial Center
- Machinery transport in Tahoe-Reno Industrial Center
- Silver Springs, NV
- How a machinery move works, step by step
How far is the Tahoe-Reno Industrial Center from the ILS yard?
It is 48.4 road miles from 3868 Goni Rd, Carson City. About 68 minutes by car in free flow is a routing estimate for planning, not a truck time or a delivery promise.
Can ILS move one machine at the park, or whole plants?
Both. One machine is welcome, estimates are free, and the same crew handles the rigging, the haul and the set-down.
Does ILS install the machine after the move?
Yes. ILS holds Nevada license 0046276, C-33 Installing Industrial Machinery, and levels and aligns machines after they are set.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)
