3868 Goni Rd, Carson City, Nevada 89706Fax: (775) 882-2693Nevada Contractors License 46276Phone: (775) 882-3319
Industrial Logistics Services badgeIndustrial LogisticsServices, Inc.Machinery moving & installation(775) 882-3319

Industrial rigging at the Tahoe-Reno Industrial Center

ILS rigs machinery at the Tahoe-Reno Industrial Center under Nevada license 0083125 (C-14I Rigging and Cranes), with forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms and a 300-ton hydraulic gantry system. The lift gear is packed for a 48.4 road-mile trip from the Carson City yard, and estimates are free.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • 4.6 on Google (15 reviews)

Tahoe-Reno Industrial Center at a glance

From the Goni Road yard
48.4 milesroad distance, OpenStreetMap routing
Elevation
4,692 ftUSGS 3DEP
County
Storey CountyUS Census Bureau
Manufacturing establishments
10ZIP 89437, County Business Patterns 2023

Key points

  • Forklifts from 3,000 lbs. to 100,000 lbs. with rigging booms
  • 300-ton hydraulic gantry system and a 2-ton portable aluminum gantry
  • ZIP 89437: 10 manufacturers and 7 warehousing sites out of 38 (CBP 2023)
  • 48.4 road miles from the yard; gear is chosen before departure
  • Nevada license 0083125, C-14I Rigging and Cranes

The park sits on USA Parkway in Storey County. Its ZIP, 89437, held 38 business establishments in the 2023 County Business Patterns, with 10 manufacturers and 7 warehousing operations, so the loads in question are machines, process equipment and storage-side equipment.

Pick the lift gear before the drive

The general method is on our rigging page. On a lift that is more than an hour from the yard by car (68 minutes in free flow, a free-flow estimate and not a truck time), the gear list is part of the estimate. A forklift with a rigging boom fits a machine on a clear slab with a wide aisle. A gantry fits a load that sits where a forklift cannot reach or where the floor cannot take the forklift's weight.

Pick the lift gear before the drive
Situation at the siteLikely method
Machine on open slab, aisle wide enoughForklift with rigging boom
Heavy load, low headroom or weak floor pathHydraulic gantry on cribbing
Light lift in a tight bay2-ton portable aluminum gantry
Move of a few feet or a turnMachinery skates and rollers

The 300-ton hydraulic gantry system and the 2-ton portable aluminum gantry are the two published gantries. The right choice comes out of the weight, the lift points and the floor.

Rigging in warehousing and manufacturing buildings

With 7 warehousing and 10 manufacturing establishments in ZIP 89437, the buildings range from storage bays to process floors. A tall bay lets a boom raise a load high but demands attention to overhead obstructions such as sprinkler lines and lights. A process floor may have trenches, sumps and anchor bolts that decide where a forklift or gantry foot can stand.

Inspection and standards

Slings and hardware are inspected before use and damaged pieces are pulled from service, as OSHA 29 CFR 1910.184 requires for general industry. The ASME B30 series covers slings, rigging hardware and gantries by name. Forklift operation follows 29 CFR 1910.178. Our team has the right equipment, experience, protective gear and safety training, and the details on gear are on the rigging gear and inspection guide.

Getting the rigging estimate

Send the machine's weight, its lift points if the manufacturer marks them, photos of the floor and ceiling above it, and the path to the dock. A site visit by one of our people is often the quickest way to settle a lift, and the estimate is free. The lift planning guide lists what a good lift plan contains.

Sources (4)

FAQ

Industrial rigging in Tahoe-Reno Industrial Center: questions

All questions

How heavy a load can ILS rig at the park?

ILS has the capacity of moving and relocating equipment weighing up to 300 tons. Whether a given lift at the park uses a forklift boom or the hydraulic gantry depends on the load and the floor.

Is the rigging crew licensed in Nevada?

Yes. ILS holds Nevada Contractors Board license 0083125, with the C-14I Rigging and Cranes and C-14J Conveyance of Goods classifications, and it is shown on the Board's public search.

How far is the park from the ILS yard?

48.4 road miles from Carson City, with two approaches. The car time is a free-flow estimate.

Free estimates

Tell us what needs moving.

Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.

(775) 882-3319

Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.

  • Nevada Contractors License 46276
  • USDOT 642556 · our own trucks
  • Carson City since 1999
  • 4.6 on Google (15 reviews)

Request a free estimate

Your details
The machine

Up to 8 photos. Big photos are resized on your device before they are sent.

Free estimates. Your details go only to Industrial Logistics Services. We call back Monday to Friday, 7 am to 4 pm.