Lockout/tagout
Lockout/tagout means shutting a machine off from all of its energy and locking it that way before anyone works on or moves it. OSHA covers the rules in 29 CFR 1910.147.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Key points
- Covers electrical, hydraulic, pneumatic, thermal and stored energy
- Each worker applies their own lock
- Tags warn others not to restore energy
- The plant's written energy control program governs
- Machines are verified de-energized before work starts
A machine does not become safe when the switch is off. Power can come back, and stored energy such as air pressure, hydraulic pressure, springs and gravity can still move parts. Lockout/tagout deals with all of it, one source at a time.
The basic sequence
OSHA's standard on the control of hazardous energy sets these elements, and Nevada's state plan adopts the federal rule.
- Notify everyone affected that the machine will be shut down
- Shut the machine down in the normal way
- Isolate it from every energy source
- Apply locks and tags to the isolating devices
- Release or block stored energy
- Verify the machine is de-energized by trying to start it
Why it comes before a move
A machine going out the door has its power, air, water, gas and coolant lines disconnected. Those disconnects are done under the plant's own lockout program, before the riggers touch the equipment, and who does each one is agreed in the estimate. After the move, reconnection follows the same discipline in reverse.
- Power: breakers locked off and cables capped
- Air and hydraulics: pressure bled down
- Fluids: drained or isolated
- Moving parts: blocked, pinned or lowered
How ILS fits
ILS describes its work as coordinating disconnect and reconnect with the people who own the machine, and its team has safety training and protective gear. The plant's lockout program governs the shutdown. Our guide on lockout before a move shows what to have ready.
Sources (3)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.147 (checked November 2026)
- Nevada Division of Industrial Relations: dir.nv.gov/OSHA/Home/ (checked November 2026)
- ASME: asme.org/codes-standards/find-codes-standards/b30-9-slings (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateIs a tag alone enough?
No. A tag is a warning device, while a lock physically holds the energy-isolating device. Where a lock can be used, OSHA's standard calls for it.
Who locks out a machine being moved?
The plant's authorized employees, under its energy control program. The mover works after the machine is verified de-energized.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)