Working load limit
A working load limit is the heaviest load a piece of rigging gear may carry in regular use. It is printed or tagged on the gear, and it is always lower than the breaking strength.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- 4.6 on Google (15 reviews)
Key points
- WLL is the rated limit for everyday use
- Always lower than breaking strength
- Found on tags, stampings or markings on the gear
- Rated for a specific hitch and angle, not just one number
- Damaged or unmarked gear comes out of service
Every sling, shackle, hoist and hook has two numbers. The breaking strength is where it fails in a test. The working load limit is that figure divided by a design factor, and it is the one riggers use.
Where the number comes from
Manufacturers set the WLL by dividing the minimum breaking strength by a design factor. The factor is chosen by the standard for that product, such as ASME B30.9 for slings and B30.26 for rigging hardware. OSHA requires slings to be used within their rated capacity and to be taken out of use when damaged (29 CFR 1910.184 and 1926.251).
The rating depends on how it is used
A single sling lifting straight up has one rated capacity. The same sling used in a basket, a choker or at an angle has a different one, and the tag usually lists several. Angle matters most: as a pair of slings spreads out, each leg carries more than half the load. See sling angle.
| Term | What it tells you |
|---|---|
| Working load limit | Safe rated load in normal service |
| Breaking strength | Load at which the gear fails in a test |
| Design factor | Ratio between those two numbers |
What to check before a lift
- Find the tag or marking and read the rated capacity
- Match it to the hitch in use: vertical, choker or basket
- Add up the weight and the share each leg will carry
- Inspect for cuts, kinks, heat damage and bent hardware
- Retire any gear that cannot be read or is damaged
ILS handles rigging, slings and hoists as part of its published equipment, and the crew inspects gear before use.
Sources (3)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1910/1910.184 (checked November 2026)
- U.S. Occupational Safety and Health Administration: osha.gov/laws-regs/regulations/standardnumber/1926/1926.251 (checked November 2026)
- ASME: asme.org/codes-standards/find-codes-standards/b30-9-slings (checked November 2026)
Send the machine details
Type, size, weight, where it is and where it is going. Photos help. Estimates are free.
Start the estimateIs working load limit the same as safe working load?
The terms are used for the same idea. Newer standards and hardware makers use working load limit, while older tags and OSHA text may say rated capacity or safe working load.
Can I use a sling at its breaking strength?
No. Gear is only used up to its working load limit.
Free estimates
Tell us what needs moving.
Free estimates on every job, big or small. Call the office or send the machine details and we will call you back.
(775) 882-3319Monday to Friday, 7:00 am to 4:00 pm. Fax (775) 882-2693.
- Nevada Contractors License 46276
- USDOT 642556 · our own trucks
- Carson City since 1999
- 4.6 on Google (15 reviews)